MJ LED LIGHTNING MJ-1350, User Manual

Page: 5 / 12

BEAM SPOT WASH (3IN1) 350W BEAM SPOT WASH (3IN1) 350W
Install The Equipment:
Use 2pcs clamp and 1safety cord(need to purchase).Use clamp fix with light hook
which in the packing box with light, then use screw install to the bottom of lamp. Hang
the fixture on the structure and fasten the screws attached to each clamp. Make sure
the light is installed reliable, and confirm the light which you fixed is strong enough for
hanging the light. Base on safety reason, please according to the above picture using
safety wire cross the light to make it strong enough again.
Warning!
1. Unlock the PAN and TILT before the 1st application of the light for safety.
2
．
Hook and clamp only use for hanging the light. Do not use clamp as a tool to move
fixtures.
3
．
Base on safety reason, please use the safety cord which can afford the weight ten
times of lamp through Insurance hole for auxiliary hanging.
4
．
Don't use the handle of the moving head light to fixed or lift!
Fitting The Lamp
：
.Loosen 4 fast-fit screws and remove the back cover, when fitting/replacing the lamp.
.Do not touch the bulb of the new lamp with bare hand so as not to influence the beam
output.
.Do not harm the sticking out point of the lamp during its installation.
.Fit new lamp and close the back cover by fastening 4 fast-fit screws when finished
lamp installation.
2
CH7
132-137
138-143
144-149
150-155
156-161
162-167
168-173
174-179
180-185
186-191
192-197
198-203
204-210
211-233
234-255
Gobo5
Gobo6
Gobo7
Gobo8
Gobo9
Gobo10
Gobo11
Gobo12
Gobo13
Gobo14
Gobo15
Gobo16
Gobo17
Static Gobo Fast-Slow
Static Gobo Slow-Fast
CH8
000-007
008-015
016-023
024-031
032-039
040-047
048-055
056-063
064-071
072-079
080-087
088-095
096-103
104-111
112-119
120-127
128-135
136-143
Rotating gobo wheel
NO
Gobo1
Gobo2
Gobo3
Gobo4
Gobo5
Gobo6
Gobo7
Gobo8
Gobo9
Gobo10
Gobo11
Gobo12
Gobo of swing
Gobo1
Gobo2
Gobo3
Gobo4
Gobo5
17