MJ LED LIGHTNING MJ-1006B, User Manual

Page: 9 / 13

Zoom Moving Head Wash 3610 MJ-1006B User Manual ver2.0
www.mjledlighting.com
9
over number 9,only ID code corresponding to the front two value which in 16
th
channel, then
other channel value are available now.

Pan reverse set

Tilt reverse set

Handspike delay, when switch on handspike delay, the controller handspike can achieve
soft dimming effect. Handspike delay can be chosen ON/OFF on the controller.

Signal link : When turn on signal link, cut off control signal will be blackout.

Code wheel: If off, ID code will failure in reset and running mode,
can’t record correct
position of pan and tilt. Will recover from wrong running operation. Reset can be max travel
reset from code wheel reset.

Temp Switch: Temperature protect switch.

Temperature: Protect temperature, when start temp protect function, if test temperature
over protect temperature, then brightness will be reduce a half.

Fan speed: keep

Screen protect:
It can be set turn off,mode1 and mode 2.When it’s OFF, then won’t enter
screen protect condition. When in mode 1,it will clear the screen. When in mode 2,after you
into screen protection, big letter display current address code. Touch the screen, you can
exit screen protect condition, and return main menu.

Screen Rot: this menu can let the screen inversion 180 degree.

Logo: if display logo

Factory set: you can set all parameters to factory set.

Reset: reset

Touch correct: When display have excursion with touch screen, you can recalibration.
6) Sys info : display related information on system

ON time: The current time when you power on it

Run time: Total time of using this light

Ver: current verson of software

Running mode: System running mode currently

DMX address

Temperature: Display current temperature
Control panel of LED display information:
Green
On DMX signal ok
Off No DMX signal
Flash DMX signal error
Red On Power
Maintenance:
To prolong the life of the projector, some maintenance work has to be done to ensure the LED
optical system in good condition. If the projector does not function, check the fuses on the power