Mizuho MOT-VE100, Operator'S Manual

Page: 36 / 54

34
4
Operation
„ „
Attaching the head plate
WARNING
• Make sure to tighten the head plate fixing handles
securely.
If the head plate moves with the handles in a
loosened state, the patient may get injured.
• The head plate weighs 7 kg (15.5lbs).
Pay special attention when handling it.
It may drop and cause damage or injury.
1.
Hold the both sides of the head plate firmly and align the
insertion shaft of the head plate with the reception hole in
the back plate, and insert.
2.
After checking that the head plate is completely inserted,
tighten the two head plate fixing handles located on the
lower side of the back plate.
Head plate fixing handle Head plate
Back plate
CAUTION
• Be sure to insert the head plate into the back plate.
If the operating table is used with the head plate
inserted incompletely, it may get damaged.
• Do not allow the operating table to move in
conjunction with the head plate when it is being
pulled out from the operating table. It may drop and
cause damage or injury.