Mizuho 7200B, Operator'S Manual, Page: 16 / 20

14
An additional set of locking knobs and guide holes
in the main back section allow the head section to
be reattached with the intermediate back section
removed. See figure 2-20.
CAUTION
Do not sit on end of leg sections as
damage may result.
Figure 2-22. Leg Section Horizontal
Positioning
Figure 2-21. Leg Section Vertical Positioning
Figure 2-20. Intermediate Back Section
Removal
2-9. Leg Section
The table has movable, split-leg sections. The
individual sections can be rotated both vertically
and horizontally. To reposition a section vertically,
lift up slightly on the leg section side rail and press
the VERTICAL ADJUSTMENT LEVER. See fig-
ure 2-21. The positioning range is from 50° above
horizontal to 45° below, in 15° increments.
WARNING
Potential pinch and/or crush hazard
exists if hands or fingers are placed
between the edges of seat and leg sec-
tions when leg sections are raised or
lowered.
To reposition the leg section horizontally, press
and hold the HORIZONTAL ADJUSTMENT LE-
VER (figure 2-22.). Position leg section as desired
and release the HORIZONTAL ADJUSTMENT
LEVER. To remove the leg section, press and hold
the HORIZONTAL ADJUSTMENT LEVER and lift
the leg section up to remove it.
BACK SECTION HEAD SECTION
HEAD SECTION
LOCKING KNOBS
VERTICAL
ADJUSTMENT
LEVER
50˚
45˚
90˚
HORIZONTAL
ADJUSTMENT
LEVER