37 Flod cloth away from other end to expose slate slatron for your fourth
.
/
glue application
See Figure 15 Apply cement to this end in the same
.(
)
mannerl Allow cement to become tacky wait at least one minute
.
,
.
38 Make a final stretch along the length of and over the edge of the table
.
,
stretch hard enough to work out all wrinkles
See Figure 17
If cloth
.(
).
is not not smooth lift and re apply
Rubbing fingers lightly
,
-
.
:
NOTE
across cloth should not make cloth move
.
39 Locate center of pocket opening
Using
.
.
See Detail A and B
(
)
sharp scissors make a straight cut Next cut to pocket edge to form
,
.
,
pie shapes begin to relax to allow for placement You may need
.
to make additional cuts
.
40 Spray adhesive on the underneath side of the slate slatron around
.
/
pocket face to adhere the cloth Make sure not to get overspray of
.
glue on table Allow cement to become tacky wait at least one
.
,
minute Stretch the pie shapes down and under the pocket opening
.
.
Press the cloth against the cement ont the underside of the slate
/
slatron Be sure entire pie shape is fully attached to underneath side
.
of table
.
DO NOT SMOKE WHILE WORKING WITH
CONTACT CEMENT READ LABEL ON CEMENT
CONTAINER CAREFULLY
!
!
APPLYING THE CLOTH
29 Make sure slate slatron is dry and free of dust
.
/
.
NOTE
Before spraying adhesive cut a portion of th shipping
:
,
carton to use as a shield to prevent cement overspray
.
30 Place cloth over slate slatron with equal overhang on all sides
.
/
.
NOTE Cloth may seem small but it will stretch fa great deal
:
.
31 Fold cloth away from end to expose slate slatron for your first glue
.
/
application Apply contact cement to top surface in a band 4 inches
.
wide on this end
See Figure 12 Coat edge also Spray cement
.(
)
.
smoothly and evenly Allow cement to become tacky wait at least
.
,
32 Fold cloth back over the table With firm even pressure press cloth
.
.
.
33 Fold cloth away from side to expose slate slatron for your second glue
.
/
application
See Figure 13
Apply cement to the side in the same
.(
).
manner as your first glue application Allow cement to become tacky
.
,
wait at least one minute
.
34 Fold cloth back over the table With firm even pressure press cloth
.
.
,
onto the area that has been coated with cement Smooth cloth down
.
and over edges
.
35 Fold cloth away from other side to expose slate slatron for your third
.
/
glue application
See Figure 14
Apply cement to this side in the
.(
).
same manner allow cement to become tacky wait at least one
.
,
minute
.
36 Stretch the cloth across the width and over the edge of th table
.
.
STRETCH HARD ENOUGH TO TAKE OUT WRINKLES BUT
,
NOT SO HARD THAT THE CLOTH SLIPS
.
onto the area that has been coated with cement Smooth cloth down
.
Figure 12
Figure 13
Figure 14
Figure 15
Figure 16
Detail B
Detail A
Page
9
