EN-5
10. Control Instructions
Function
Operation
Power on
When the headphone is off, press and hold the
power button for about 8 seconds until the LED
flash blue and red alternatively, then select the
"Mixcder HD901" to pair.
Press and hold the power button for 2s, and the
LED flashes blue and sounds "Power on".
Press the V+ button
Press the V- button
Press the power button
Press the power button
Press and hold the V+ button for 2s
Press and hold the V- button for 2s
Pairing
Press and hold the power button for 2s, and the
LED flashes red and sounds "Power off".
Power Off
Increase Volume
Decrease Volume
Play Media
Pause/ Restart
Media Playback
Skip to Next Track
Skip to Previous Track
Answer a Call
When a call comes in, press the power button
End a Call
When you want to end a call, press the power
button
TF Card/ Wireless
Mode Exchange
1.In wireless mode, press the power button twice,
change to TF card mode, you will hear the prompt
"play by TF card". If no TF card insert, it will
reconnect the device.
2.In TF card mode, press the power button twice,
then you will hear the voice "connected". The
blue LED lights twice. If the TF card insert, it will
default to play by TF card.
setting low volume level before putting on the headphone and
avoiding exposing yourself continuously to high volumes. If
you need to use the headphone for a long period, rest ten
minutes for a half hour using.