Installation of the SeaWire Pro
User Guide SeaWire Pro
MiWire ApS
9
STEP 2
– PREPARING MOUNTING BRACKET AND CONNECTING THE
ETHERNET CABLE
IMPORTANT:
It is required to mount the mounting bracket
to avoid humidity and dirt entering the
RouDem.
1. Pass the cable through the cable gland.
a. Unscrew the sealing nut and use a small tool such as an Allen key or a pen to get
the seal out.
b. Pass the cable through the body and the sealing nut, mount the seal on the cable
and place the seal back into the claw.
c. Screw on the sealing nut and make sure it is tightened very tight.
2. Connect the Ethernet cable to the Ethernet port in the RouDem.
3. Affix the mounting bracket to the RouDem with the five screws using the supplied Torx 10
Key.
IMPORTANT:
it is important that the mounting bracket is secured with all five
screws to maintain waterproofness.
4. Tighten the mounting bracket to a pole of Ø38mm/
1.5” pole by tightening the two grub
screws with the supplied Unbraco 4 Key.
❶
a
❶
b
❶
c
❷
❸
❹
Summary of Contents for SeaWire Pro
Page 2: ......
