14
|
MIVARDI
Monitoring of key functions and fault reporting
The boat has a monitoring of the key functions. If a fault is detected, the corresponding symbol will appear on the display.
If this happens, inform your dealer about the type of error (symbol displayed).
Menu items and their settings:
cALIbRATE Rc
coMPASS
Press the power button to enter the RC calibration mode. Press the power button again to
start this calibration. Hold the RC in a horizontal position. Rotate the RC 360 ° around the
vertical axis and then move the RC up and down. When the calibration is completed, the
calibration mode symbol disappears from the screen.
cALIbRATE boAT
coMPASS
1) Ride the boat a few meters far from the bank. Then activate this menu item using the
main switch button to start the calibration.
2) The boat on the water automatically performs the calibration (rotates round left and
right) and then it announces the completion of the calibration.
Note: calibration is successful if the arrow on the Rc display (the controller must be
held horizontally) points in the same direction as the bow of the boat. otherwise, the
calibration must be performed again.
FISH FINDER
Set the sensitivity from the lowest to the highest (C1, C2, C3)
boAT bATTERY
Select your boat version (used boat batteries). You can choose from lithium and lead-acid
batteries (Li / Q). Wrong setting will cause a wrong function of the battery status monitor
and empty battery warning.
PAIRING MoDE
This option allows to pair the boat with RC. Your boat has been paired before delivery. It is
not necessary to do it again. In rare cases, a pairing error may occur, and the pairing needs
to be restored. The boat must be switched off when pairing. Switch on the RC only. In the
main menu, select „Pairing mode“ and enter it with power button. Then select the required
channel with the arrow keys and press the power button to save it. The countdown starts on
the controller. At this moment, turn on the boat. The lights will flash during the pairing. When
the pairing is completed, the pairing mode remains on the display for 5 seconds and then the
main menu is displayed.
EXIT
Confirm this menu item to leave the main menu.
CALIBRATE RC COMPASS
CALIBRATE BOAT COMPASS
FISH FINDER
BOAT BATTERY
PAIRING MODE
EXIT
Main menu items:
Rc compass
boat compass
Fish finder
GPS module
Summary of Contents for Carp Scout LA
Page 21: ...MIVARDI 21 ...
