4
5
6
7
8
9
10
11
12
NOTE
Do not allow dispensing unit and master
cylinder reservoir to run dry. Use
pressure relief valve (
8
) to relieve
pressure and add new fluid if necessary.
NOTE
Do not store hydraulic fluid in reservoir
(
12
). Clean dispensing unit with dena-
tured alcohol and store properly.
Fig. 4
22
Once all brakes are bled, relieve pressure in
reservoir (
12
) and master cylinder by
tilting pressure relief knob (
8
).
23
Close fluid dispensing hose (
14
) shut-off
valve, and carefully remove adapter from
master cylinder, being careful not spill
brake fluid.
24
Extract excess fluid or top-off master
cylinder as required, and replace cap.
25
Dispose of remaining hydraulic fluid.
26
Test brake or clutch system for leaks
before driving vehicle.
7
Summary of Contents for MV7102
Page 5: ...10 8 9 5 6 7 7 10 8 9 5 6 Fig 2 Fluid dispensing Fig 3 Fluid evacuating 5 ...
Page 17: ...10 8 9 5 6 7 7 10 8 9 5 6 Fig 2 Distribution d un fluide Fig 3 Évacuation d un fluide 5 ...
Page 29: ...10 8 9 5 6 7 7 10 8 9 5 6 Bild 2 Abgabe von Flüssigkeit Bild 3 Ansaugen von Flüssigkeit 5 ...
Page 41: ...10 8 9 5 6 7 7 10 8 9 5 6 Fig 2 Distribución de fluido Fig 3 Evacuación de fluido 5 ...
