Mitutoyo TM-500 Series, User Manual

Page: 5 / 42

䃂
Only use the power cord that is supplied with the instrument. For a replacement power cord,
contact Mitutoyo.
䃂
Only use the supplied replacement fuse or a fuse with identical specifications (type, nominal
voltage and current).
(5) Ground Positively
䃂
Ground the Measuring Microscope positively, especially if it must be installed near
equipment emitting substantial amounts of electric noise. To do this connect the grounding
wire from the Measuring Microscope to the body of a piece of equipment, which also must
be grounded. The grounding wire should be as short as possible and should not be wound
into a loop or coil.
(6) Do Not Disassemble
㩷 䃂
There are high-voltages inside the Measuring Microscope. Do not attempt to disassemble it
unless otherwise specified.
WARRANTY
In the event that the Mitutoyo Measuring Microscope TM-500 series should prove
defective in workmanship or material, within one year from date of purchase for use, it
will be repaired or replaced, at our option, free of charge upon its prepaid return to us.
PRECAUTIONS/WARRANTY
iii