Mitsubishi ws-48413, Owner'S Manual

Page: 45 / 80

44
45
Antenna
(Figure 32)
Select Ant-A or Ant-B. For each antenna, you can
add or delete channels in memory, name channels,
and add channels to the SQV (Super Quick View™)
list.
Channel
(Figure 33)
Select to edit the channel selections. You can add or
delete from memory, name, or add to the SQV (Super
Quick View™) list.
After selecting Channel, editing can be done using the
Adjust buttons or entering the  digit channel number
you want to change (Example  for channel ).
For WS-, WS- and WS-, during
NetCommand® IR setup, if you connected a cable box
with an RF output other than channel  you can use
the Channel Edit menu to tune the TV to the correct
channel.
Change Antenna from Air to Cable. Then for the
Channel, select  or , depending on your cable
box requirement. The channel you select in this menu
will be the fixed channel used with your cable box.
CHANNEL EDIT Menu: Antenna, Channel Selection
ENTER for menu or to start
MENU to return
��� ������� ������
�����������������
���������������� �����������������
���������
�����������������
�������� � � � � ��������
�������� � � � � �����
������� � � � � �������
������ � � � � ������
���� � � � � � ������
� � � � � � �����
ENTER for menu or to start
MENU to return
��� ������� ������
����������������
������� ��������� �����������������
���������
�����������������
�������� � � � � ��������
�������� � � � � �����
������� � � � � �������
������ � � � � ������
���� � � � � � ������
� � � � � � �����
Figure 32. Antenna
Figure 33. Channel