background image

8

Safety Instructions

•  Read all safety instructions before using the Wi-Fi Adaptor.

•  This installation manual contains important safety information. Be sure to 

comply with the instructions.

•  After installing the Wi-Fi Adaptor, provide this installation manual to the 

user. Instruct users to store it with their heat pump instruction manual in 

a safe location.

Warning

(Improper handling may have serious consequences, including serious injury or death.)

• Installation of the adaptor must be carried 

out by an authorised installer only.

• Improper installation may result in fire, 

electric shock, or damage/water leaks. 

Consult the dealer from whom you 

purchased the unit, or a professional 

installer.

• The adaptor should be securely  

installed in accordance with this 

installation manual.

• The unit should be mounted in a location 

that can support its weight.

• If the unit is installed in a location that 

cannot support its weight, the Wi-Fi 

Adaptor could fall and cause damage.

• Connect and fasten the electric wires 

securely so external force on the wires will 

not apply on the terminals.

• Improper connection and mounting may 

result in breakdown, heat generation, 

smoke generation, or fire.

• Mitsubishi Electric components or other 

designated components must be used for 

installation.

• Improper components may result in fire, 

electric shock, or damage/water leaks. 

• Electrical work must be performed 

by a licensed professional using the 

instructions detailed in the installation 

manual.

• Inadequate circuit capacity or improper 

installation may result in electric shock 

or fire.

• This appliance is not intended for use by 

persons (including children) with reduced 

physical, sensory or mental capabilities, 

or lack of experience and knowledge, 

unless they have been given supervision 

or instruction concerning use of the 

appliance by a person responsible for 

their safety.

• Children should be supervised to ensure 

that they do not play with the appliances.

• This device complies with all Australia 

and New Zealand requirements for EMC 

and electrical safety.

• Do not connect the Wi-Fi Adaptor to earth 

inside the heat pump.

Summary of Contents for Wi-Fi Control













Reviews: