7
When LED 1 remains solid for 5
seconds the adaptor is connecting
to your router.
Next, the bottom light (LED 3) will
start flashing as it connects to the
internet. This may continue for up
to 4 minutes.
When LED 1 and LED 3 flash
alternately the unit is successfully
connected to the internet.
If LED 2 (orange) lights up at any
stage there may be a problem.
Check the troubleshooting section
on page 11.*
You can now download the
Mitsubishi Electric Wi-Fi Control
App and control your heat pump
via Wi-Fi.
6
9
5
7
8
Turn the adaptor over and check
LED 1 (top light) is flashing.
4
*You can restart the connection process at anytime by starting again from Step 1
.
Summary of Contents for Wi-Fi Control
Page 1: ...1 INSTALLATION GUIDE...
