Mitsubishi Trium T300 User Manual Download Page 61

Page: 61 / 72

HANGING

THE

ACEPLATE

Before changing the faceplate always turn off the phone and disconnect
from any charging device or car kit.

Removing the Faceplate

Replacing the Faceplate

• When changing the faceplate, do not use excessive force and avoid bending it.
• Always use the phone with the faceplate attached.
• Do not clean the phone with alcohol, strong chemicals or solvents.

Wipe it only with a soft, slightly dampened cloth. Read the

Care and Mainte-

nance

instructions on page 18.

Insert a small blunt instrument, such as a paper clip, into

the slot provided and gently but firmly lift up one end of the

faceplate.

Take hold of the raised end of the faceplate and carefully

pull up, unclipping it from the phone. Gently slide the

faceplate downward. The faceplate will unhook from the

phone and lift away.

Place the front faceplate hooks into the hook slots at the

top of the phone.

Slide gently upward.

Press the faceplate down firmly, clipping it into position.

Summary of Contents for Trium T300









































































Search results

Summary of Contents for Trium T300

Reviews:

Brands by name

Popular brands

Mitsubishi Trium T300, User Manual

Search results

Summary of Contents for Trium T300

Reviews:

Brands by name

Popular brands