background image

– 4 –

 

Safety precautions

 

OPERATION PRECAUTIONS

 WARNING

 

Children shall not play with the 

air-conditioner. 

 

Do not expose yourself to the cooling 

air for a long period.

This could affect your physical condition 

and cause health problems.

 

Cleaning and user maintenance shall 

not be made by children without 

supervision. 

 

Do not insert anything into the air 

outlet.

This may cause injury, as the internal fan 

rotates at high speed.

 

This air-conditioner can be used by children aged from 8 years and above 

and people with reduced physical, sensory or mental capabilities or lack of 

experience and knowledge, if they have been given supervision or instruction 

concerning use of the air-conditioner in a safe way and understand the hazards 

involved. 

 

Store the remote control out of reach of children.

Failure to observe this may result in the batteries being swallowed or other accidents.

 CAUTION

 

Only use approved fuses.

Use of steel or copper wire instead of an 

approved fuse is strictly prohibited, as it 

may cause a breakdown or fire.

 

Do not handle the switches with wet 

hands.

This may cause an electric shock.

 

Do not swing from the indoor unit.

If the indoor unit falls down,you may get 

injured.

 

Do not place a flammable insecticide 

or paint spray near the air-conditioner, 

nor spray it directly on the system.

This may result in a fire.

 

Do not expose any combustion 

appliance directly to the air stream of 

the air-conditioner.

The combustion appliance may 

malfunction.

 

Do not wash the air-conditioner with 

water.

This could cause an electric shock.

Using a high pressure washer may cause 

damage to the aluminum fins, resulting in 

performance decrement.

 

Do not use for preservation of food, 

plants or animals, precision devices or 

works of art.

The system is only intended for use in 

ordinary domestic rooms. Any other use 

of the system may damage the quality of 

food, etc.

 

Do not place anything containing 

water, like vases, on top of the unit.

Water entering the unit could damage the 

insulation and therefore cause an electric 

shock.

 

Do not install the air-conditioner where 

the airflow direction is aimed directly at 

plants or animals.

This will damage their health.

 

Do not sit on the outdoor unit nor put 

anything on it.

If the unit falls down or things drop from it, 

people could get hurt.

 

After a long period of use, check the 

unit’s support structure regularly.

If you do not repair any damage right 

away, the unit may fall down and cause 

personal injury.

RLF012A104_EN.indd   4

RLF012A104_EN.indd   4

1/13/2017   6:35:40 PM

1/13/2017   6:35:40 PM

Summary of Contents for SRK20ZSA-W









































Reviews: