background image

3

Do not install the unit 

where the airflow is 

directly blown to animals and 

plants.
They may suffer from adverse 

effect.
Before cleaning, make 

sure to stop operation 

and cut off the power.
The fan inside rotates at high 

speeds.
Make sure to use proper 

size of fuse.
Using steel wire or copper wire 

may lead to failure or fire.
Do not store a flammable 

spray etc. near the unit, 

nor blow directly to the unit.
It may lead to fire.
Before maintenance, 

make sure to stop 

operation and cut off the 

power.
The fan inside rotates at high 

speeds.
When the unit isn’t used 

for a long-term, cut off the 

power.
The accumulation of dirt may 

lead to heat generation or fire. 

But, before resuming the 

operation, turn on the unit for 

six hours beforehand to save 

harmless.

Do not operate the air 

conditioner while the air 

filter is removed.
Piled up dust may lead to 

malfunction.
During thunderstorm, 

stop the operation and 

turn off the switch.
A lightning strike may lead to 

failure.
After several seasons of 

operating, inspections 

and maintenances are 

required except routine care 

and cleaning.
Accumulated dirt or dust inside 

the indoor unit may cause odor, 

water leakage through the 

clogging of water discharging 

pipe for dehumidification. 

Specialized information 

and skills are required for 

inspections and maintenances. 

Therefore contact your dealer.
Do not place any object 

around the outdoor unit, 

nor allow fallen leaves to pile 

up.
Fallen leaves may induce 

insects and worms in them, 

and they may lead to failure, 

ignition or smoking by touching 

electric components.
Do not use with inlet/

outlet grilles or other 

panel removed.
Otherwise, it may lead to 

injuries.

Do not place any other 

electric appliances or 

household goods below or 

around the air conditioner.
Dripping from the unit may lead 

to failure or contamination.
Do not touch the 

aluminum fin.
Otherwise it may lead to 

injuries.
Do not clean the inside 

of the indoor unit by 

yourself. Make sure to 

consult your dealer or user 

inquiry counter specified by 

our company.
If you select incorrect detergent 

or improper method, resin 

parts may be damaged and 

lead to water leakage. If the 

detergent is dropped on the 

electric component or motor, it 

may lead to failure, smoking or 

ignition.
Do not place objects on 

the outdoor unit, nor 

mount on it.
It may lead to injuries resulting 

from dropping or falling.
During the operation or 

maintenance, do not use 

an unstable footrest.
It may lead to injuries resulting 

from falling.
Be careful so that the 

dust does not get into 

your eyes when removing 

the air filter.

Do not operate or stop the 

unit by using the power 

supply switch. 
It may lead to fire or water 

leakage.  

If auto restart is set effectively, 

the fan may rotate suddenly 

causing injuries.
Do not touch blowout port 

when the swing louver 

moves. 
Otherwise, it may lead to 

injuries.
Do not strain the remote 

control cord.
A part of core wire may be cut 

off causing electric leakage.
Do not use water heater 

etc. near the indoor unit 

or remote control.
If a Vapor-generating appliance 

is used near them, it may lead 

to water drop causing electric 

leakage or short circuit.
Do not use the unit where 

powder or fiber is floating.
Fine powder or fiber passing 

through the air filter may 

stagnate inside the unit and 

lead to electric leak or short 

circuit.
Do not place objects 

under the unit which 

must avoid being exposed to 

water. 
Over 80 percent humidity or 

the clogging of drain pipe may 

damage them through dew 

dropping.

Summary of Contents for RC-E5

























Reviews: