6
4. Part Names and Settings
This section explains the names and settings of each part of the QJ71PB92V.
*1 Use a D-Sub 9-pin male connector.
The PROFIBUS cable is to be fabricated by users. (For details on cable wiring,
refer to Section 5.1.)
The applicable screw size is #4-40 UNC.
Figure 4.1 QJ71PB92V appearance
Table 4.1 Names of part
No.
Name
Description
1)
Indicator LEDs
These LEDs indicate the operation
status of the QJ71PB92V.
For details, refer to (1) in this chapter.
2)
PROFIBUS interface connector
This connector connects the
PROFIBUS cable to the
QJ71PB92V.*1
1)
2)
