background image

8

ECONO COOL OPERATION

Use this operation when you want to be comfortable in COOL mode even with energy saved.

TIMER OPERATION (ON/OFF TIMER)

It is convenient to set the timer when you go to bed, when you get home, when you get up, etc.

How to set the ON timer

1

Press the 

     START

 button during operation.

Each time the button is pressed, the ON timer mode
alternates between ON and OFF.

2

Set the time of the timer using the 

HR.

 and

MIN.

 buttons.

Each time the 

HR.

 button is pressed, the set time in-

creases by 1 hour; each time the 

MIN.

 button is pressed,

the set time increases by 10 minutes.

To release the ON timer:

Press the 

     START

 button.

How to set the OFF timer

1

Press the 

    STOP

 button during operation.

Each time the button is pressed, the OFF timer mode
alternates between ON and OFF.

2

Set the time of the timer using the 

HR.

 and

MIN.

 buttons.

Each time the 

HR.

 button is pressed, the set time in-

creases by 1 hour; each time the 

MIN.

 button is pressed,

the set time increases by 10 minutes.

To release the OFF timer:

Press the 

    STOP

 button.

Perform the following operations while the unit is operat-
ing in the MANUAL COOL mode.

Press the 

ECONO COOL

 button.

When the   (ECONO COOL) operation is selected in COOL mode, the air
conditioner performs swing operation in various cycle according to the tem-
perature of air conditioner.
Also SET TEMPERATURE is automatically set 2°C higher than in COOL mode.

To release the ECONO COOL operation:

Press the 

ECONO COOL

 button again.

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

When the 

VANE

 button or the 

LONG

 button is pressed or the operation mode

is changed during the ECONO COOL operation, ECONO COOL operation
is released.

The 

FAN

 button, the 

TOO

WARM

 or 

TOO

COOL

 button and ON/OFF timer (explained below)

are available.

Programming timer operation

The ON timer and the OFF timer can be used in combination. The timer of the set time that is reached first will operate first.
(“ ” mark indicates the order of timer operations.)
• If the current time has not been set, the timer operation cannot be used.

NOTE:
If the main power is turned off or a power failure occurs while AUTO START/STOP timer is active, the timer setting is
cancelled. As these models are equipped with an auto restart function, the air conditioner starts operating with timer
cancelled at the same time that power is restored.

What is “ECONO COOL”?

Swing air flow (change of air flow) makes you feel cooler than constant air flow. So, even though the set temperature is
automatically set 2°C higher, it is possible to perform cooling operation with keeping comfort. As a result, energy can be saved.

Perform the following operations while the unit is operat-
ing.

Press the 

LONG

 button.

The fan speed increases.
When the fan speed is set to 

 (AUTO), the fan speed is higher than a fan

speed determined by the room temperature and the set temperature.
In addition, the HORIZONTAL VANE moves to the position for LONG mode.

Mechanism of the LONG operation

In the following example, the VERTICAL VANE is set to 

 (front).

COOL/DRY

HEAT

Fan speed: Higher
Solid arrow: When the LONG mode is used
Dotted arrow: When the LONG mode is not used

To release the LONG mode:

Press the 

LONG

 button again.

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

LONG mode is also released in the following ways.

By pressing the 

VANE

 button

By pressing the 

ECONO COOL

 button (only during COOL mode)

Even when the LONG mode is being used, the air may not reach a long dis-
tance due to the installation location of the air conditioner.

In this case, press the 

FAN

 button to set the fan speed to 

 (High), and

then press the 

LONG

 button.

MODE

FAN

, and 

WIDE VANE

 buttons, temperature buttons and the ON/OFF timer

are available.

LONG OPERATION

Use this operation when you want the air flow to reach a long distance.

ON/OFF

FAN

TOO

WARM

TOO

COOL

VANE

MODE

ECONO COOL

    STOP

     START

HR.

MIN.

I FEEL COOL

DRY

AM

PM

CLOCK

˚C

AMPM

WIDE VANE

LONG

HEAT

RESET CLOCK

ON/OFF

FAN

TOO

WARM

TOO

COOL

VANE

MODE

ECONO COOL

    STOP

     START

HR.

MIN.

I FEEL COOL

DRY

AM

PM

CLOCK

˚C

AMPM

WIDE VANE

LONG

HEAT

RESET CLOCK

Summary of Contents for MSZ-A18 YV Series

















Reviews: