14
PLASMA/WASH lamp
Blinking
Not lighted
Lighted
WASH reset switch
WASH
reset
E.O.
SW
Each time this b utton is pressed, the oper
ation mode of PLASMA is changed in
sequence:
Cancel (The sign of PLASMA oper
ation disappears
.)
PLASMA/WASH lamp tur ns on in the displa y section of the indoor unit and
PLASMA DEODORIZING and/or PLASMA AIR PURIFYING unit is energyz
ed.
Adjust the air flow to your desired speed.
(1) Press OPERATE/STOP (ON/OFF) button to start the air conditioner.
(2) Press PLASMA button to set PLASMA DUO operation.
(3) PLASMA operation is cancelled when the "cancel" is selected by pressing PLASMA button.
Once PLASMA operation is selected, PLASMA operation will be performed every time
the air conditioner is turned on until the "Cancel" is selected with PLASMA button.
1-10. PLASMA DUO ( ) OPERATION
●
Never touch the PLASMA DEODORIZING/AIR PURIFYING filter units during the operation of the air
conditioner. Although the filter units are safety-conscious design, touching the units could be the cause
of trouble as they discharge high voltage electricity.
PLASMA/WASH lamp
Not lighted
Lighted
Description of PLASMA DUO operation:
<
function>
Both PLASMA DEODORIZING and PLASMA AIR PURIFYING operation work.
<
function>
PLASMA DEODORIZING operation cleans the air inside the room by adsorbing and decomposing
the particles of odor-releasing substances and gases such as formaldehyde.
<
function>
PLASMA AIR PURIFYING operation cleans the air inside the room by absorbing the particles of cigarette
smoke or allergens such as pollens and house dust.
NOTE1: Carbon monoxide released from cigarettes cannot be removed by PLASMA operation.
Open the windows to let the outside air in from time to time.
NOTE2: During PLASMA operation, you may smell ozone that is generated in small quantities
from PLASMA DEODORIZING/AIR PURIFYING filter units. This is not a malfunction.
NOTE3: You may hear a small "hissing" sound during PLASMA operation. This is the sound of plasma
discharge, and not a malfunction.
<Cleaning>
When PLASMA/WASH lamp is blinking, please clean
PLASMA DEODORIZING/AIR PURIFYING filter units
.
After cleaning of
PLASMA DEODORIZING/AIR PURIFYING filter units
, press WASH reset switch.
A short “beep” is heard and the blinks of PLASMA/WASH lamp will be cancelled.
OBT14A--1qxp 06.1.12 1:07 PM Page 14