A - 3
[WIRING PRECAUTIONS]
CAUTION
Do not grab on the cable when removing the communication or power
cable connected to the module.
When disconnecting a cable without a connector, first loosen the screws on
the part that is connected to the module.
Pulling the cable when it is still connected to the module may cause
damage to the module or cable, or misoperation due to cable contact
failure.
Always ground the shielded cable for the PLC.
There is a risk of electric shock or malfunction.
When wiring, be sure to verify the rated voltage of the product as well as
the terminal layout. Fire or failure may result if incorrect voltage is input or
incorrect wiring is performed.
Connecting terminals with incorrect voltage may result in malfunction or
mechanical failure.
REVISIONS
The manual number is given on the bottom right of the top cover.
Print Date
Manual Number
Revision
Jun.,2000
IB (NA)-0800120-A First edition
Mar.,2006
IB (NA)-0800120-B
Partial correction
Chapter 3, 4
This manual confers no industrial property rights or any rights of any other kind, nor
dose it confer any patent licenses. Mitsubishi Electric Corporation cannot be held
responsible for any problems involving industrial property rights which may occur as
a result of using the contents noted in this manual.
© 2000 MITSUBISHI ELECTRIC CORPORATION
