A-5
Conformation to the EMC Directive and Low Voltage Instruction
(1) About sequence system
When incorporating the Mitsubishi programmable controller into other
machinery or equipment and keeping compliance with the EMC and low
voltage directives, refer to Chapter 9, "EMC Directive and Low Voltage
Instruction" of the QCPU User's Manual (Hardware Design, Maintenance
and Inspection).
The CE logo is printed on the rating plate of the programmable controller,
indicating compliance with the EMC and low voltage directives.
(2) About this product
The following wiring is required for conformance of this product with the
EMC Directive and Low Voltage Directive.
(a) Use shielded cables for all external wiring and use the AD75CK cable
clamp to ground this product to an enclosure.
Q
62HLC
20cm (7.88 inch) to
30cm (11.82 inch)
AD75CK
Strip the sheath.
Inside control box
(b) Using the AD75CK, you can tie four cables of about 7mm outside
diameter together for grounding.