Mitsubishi HS-S9600U, Installation And Operation Manual

Page: 17 / 44

13
Advanced Functions
Reference page
One shot/Interval Recording
One shot recording allows you to control the number of fields to
be recorded when the REC button is pressed or the REC IN
terminal is grounded. Interval recording is made at the selected
number of fields and at the selected interval.
1. Press REC/PLAY MODE button on the front panel to set the
recording mode to 0H.
2. Press MENU button.
• <MAIN MENU> appears.
3. Turn JOG to select RECORDING SET
UP and turn SHUTTLE to the right.
• <RECORDING SET UP> menu
appears.
4. Turn JOG to select REC MODE and
turn SHUTTLE to the right.
5. Turn JOG to select the recording
mode, NORMAL<SP> or H•D<EP>
and turn SHUTTLE to the right.
6. Turn JOG to select ONE
SHOT•FIELD and turn SHUTTLE to
the right.
7. Turn JOG to select the number of
recording field and turn SHUTTLE to
the right.
8. Turn JOG to select ONE
SHOT•INTERVAL and turn SHUTTLE
to the right.
For one shot recording, setup step 9 only:
9. Turn JOG to select SHOT and turn
SHUTTLE to the right.
For interval recording, setup step 10 only:
10. Turn JOG to select the recording
interval and turn SHUTTLE to the
right.
11. Press REC button.
• The one shot recording will be on standby mode.
• The VCR starts the interval recording with the interval
time selected in step 6 above.
12. To start one shot recording, press REC button again or
switch the REC IN terminal on the rear panel to the ground.
<MAIN MENU>
DISPLAY
TIMER PROGRAM
RECORDING SET UP
REAR TERMINAL
MAINTENANCE
<RECORDING SET UP>
ALARM REC MODE 2H
ALARM REC DURATION 1M
EMERGENCY REC OFF
CLOG DETECT ON
REC MODE NORMAL<SP>
EMERGENCY REC OFF
CLOG DETECT ON
REC MODE NORMAL<SP>
S-VHS/S-ET ON
ONE SHOT•FIELD 1
ONE SHOT•INTERVAL 10S
EMERGENCY REC OFF
CLOG DETECT ON
REC MODE H•D<EP>
S-VHS/S-ET ON
ONE SHOT•FIELD 1
ONE SHOT•INTERVAL 10S
EMERGENCY REC OFF
CLOG DETECT ON
REC MODE H•D<EP>
S-VHS/S-ET ON
ONE SHOT•FIELD 1
ONE SHOT•INTERVAL 10S
EMERGENCY REC OFF
CLOG DETECT ON
REC MODE H•D<EP>
S-VHS/S-ET ON
ONE SHOT•FIELD 5
ONE SHOT•INTERVAL 10S
CLOG DETECT ON
REC MODE H•D<EP>
S-VHS/S-ET ON
ONE SHOT•FIELD 5
ONE SHOT•INTERVAL 10S
<MAIN MENU>
DISPLAY
TIMER PROGRAM
RECORDING SET UP
REAR TERMINAL
MAINTENANCE
CLOCK/FIRST TIME SET UP
<FIRST TIME SET UP>
TIME DATE ADJUST
TAPE END STOP
QUASI V-SYNC ON
VIDEO MODE AUTO
TAPE LENGTH T-120
BUZZER WRNG
<FIRST TIME SET UP>
TIME DATE ADJUST
TAPE END STOP
QUASI V-SYNC ON
VIDEO MODE AUTO
TAPE LENGTH T-120
BUZZER WRNG
<FIRST TIME SET UP>
TIME DATE ADJUST
TAPE END REPEAT
QUASI V-SYNC ON
VIDEO MODE AUTO
TAPE LENGTH T-120
BUZZER WRNG
TAPE END
setting
REPEAT
REWIND
ALARM•
PROT
STOP The tape stops.
When there are alarm
recordings on tape When there is NO alarm
recording on tape
The tape stops.(*)
The tape is rewound
automatically to the
beginning and then
recording is resumed.
The tape is rewound automatically to the
beginning (except in timer recording) and
then stops.
The tape is rewound automatically to the
beginning and then recording is resumed
(also recording over existing alarms).
Repeat Recording
With this function, when the tape is reached its end during
recording, the VCR rewinds the tape and starts recording again.
1. Press MENU button.
• <MAIN MENU> appears.
2. Turn JOG to select CLOCK/FIRST
TIME SET UP and turn SHUTTLE to
the right.
• <FIRST TIME SET UP> menu
appears.
3. Turn JOG to select TAPE END and
turn SHUTTLE to the right.
4. Turn JOG to select REPEAT or
ALARM•PROT and turn SHUTTLE to
the right.
Refer to the table below for
REPEAT and ALARM•PROT.
• Repeat indicator ( ) illuminates
on the fluorescent display.
5. Press MENU button.
• The day and present time display appears on screen.
When the tape reaches its end during recording
The following functions are automatically engaged when the
tape ends during recording.
* To repeat recording on the same tape again, eject the tape
once and reinsert.
CLOG DETECT ON
REC MODE H•D<EP>
S-VHS/S-ET ON
ONE SHOT•FIELD 5
ONE SHOT•INTERVAL SHOT
CLOG DETECT ON
REC MODE H•D<EP>
S-VHS/S-ET ON
ONE SHOT•FIELD 5
ONE SHOT•INTERVAL 30S