Mitsubishi HS-7168E, Installation And Operation Manual

Page: 19 / 32

18
<TIMER PROGRAM>
DW START END HR
1 - - - - - : - - - - : - - - - -
2 DAY 08 : 40 17 : 25 L18LP
3 MON 22 : 00 22 : 50 72LP
4 WED 22 : 00 22 : 50 96LP
5 SPL 20 : 30 23 : 30 3SP
6 MON 10 : 10 11 : 15 SKIP
7 SUN 23 : 30 00 : 15 6LP
8 MON 21 : 00 21 : 54 3SP
SPECIAL DW MON-FRI
• “DAY” (in “Day of the week”) is used for the
same time recording everyday.
• “SPL” (special) (in “Day of the week”) indicates
that the recording period set in “TIMER
PROGRAM” display becomes available.
• “SKIP” (in “HR”) indicates that timer recording
is not performed during the set period.
• A 24-hour display is used. 00:00 indicates
midnight; 12:00 midday and 15:00 3 o’clock in
the afternoon.
• If the recording times of two programs overlap,
the higher program number is given priority.
• In 3H, 6H, L18H or L24H mode, audio is also
recorded.
1
Press the DISPLAY button to display the MAIN MENU on the monitor.
2
Turn the JOG dial to select “TIMER PROGRAM” and turn the SHUTTLE ring to
the right.
•
“TIMER PROGRAM” display will appear.
3
Turn the JOG dial to select the program number and turn the SHUTTLE ring to
the right. The day of the week display flashes.
4
Setting the day of the week (DW).
Turn the JOG dial to set the day of the week and turn the SHUTTLE ring to the
right.
5
Setting the recording start time (START).
Turn the SHUTTLE ring to select the recording start time display.
Turn the JOG dial to set the recording start time.
6
Setting the recording end time (END).
Turn the SHUTTLE ring to select the recording end time display.
Turn the JOG dial to set the recording end time.
7
Setting the recording mode (HR).
Turn the SHUTTLE ring to select the recording mode display.
Turn the JOG dial to set the recording mode.
8
Turn the SHUTTLE ring to the right.
The display stops flashing.
If the program has not been set completely, the flashing will not stop.
Program
number
Day of the
week
Recording start time
Next day indicator
Recording end time
Recording mode display
DW START END HR
1 SPL 08 : 40 17 : 10 L18LP
- - - - - : - - - - : - - - - -
)
DW START END HR
1 SPL 08 : 40 17 : 10 L18LP
SAT - - : - - - - : - - - - -
)
DW START END HR
1 SPL 08 : 40 17 : 10 L18LP
SAT - - : - - - - : - - - - -
)
DW START END HR
1 SPL 08 : 40 17 : 10 L18LP
SAT 08 : 00 - - : - - - - -
)
DW START END HR
1 SPL 08 : 40 17 : 10 L18LP
SAT 08 : 40 - - : - - - - -
)
DW START END HR
1 SPL 08 : 40 17 : 10 L18LP
SAT 08 : 40 12 : 00 - - -
)
DW START END HR
1 SPL 08 : 40 17 : 10 L18LP
SAT 08 : 40 12 : 00 - - -
)
DW START END HR
1 SPL 08 : 40 17 : 10 L18LP
SAT 08 : 40 12 : 00 72LP
)
<
TIMER PROGRAM
>
DW START END HR
SPL 08 : 40 17 : 10 L18LP
2 - - - - - : - - - - : - - - - -
)
TIMER RECORDING
• If the END time is the same or earlier than the START time, the next day indicator (•) is automatically displayed.
This indicates that the recording will run continuously from the START time on the first day to the END time on the next day.
• When setting another program, turn the SHUTTLE ring to set and repeat steps
3
-
8
. A maximum of eight programs can be made.
• To erase the program setting, select the program number to be erased. Turn the SHUTTLE ring to the right to flash the day of the
week, then turn the SHUTTLE ring to the left.
9
Press the DISPLAY button to show the day and present time on the monitor.
A
Press the TIMER REC button.
The TIMER REC indicator is illuminated.
)
<MAIN MENU>
DISPLAY
TIME DATE SEARCH
TIMER PROGRAM
RECORDING SET UP
REAR TERMINAL
MAINTENANCE
FIRST TIME SET UP
Use JOG to select,
and ENTER.
Press DISPLAY to exit.