Mitsubishi HS-1096E, Installation And Operation Manual

Page: 6 / 32

6
Introduction
Note A point to notice
Info.
Supplementary information
Controls and Functions (Cont.)
Fluorescent Display
(Counter Memory Stop/Month) indicator
Illuminates during the counter memory stop.
Also, flashes while the VCR is turned off and the month of
the VCR’s clock has been set on the fluorescent display.
(Power Loss) indicator
Illuminates when the VCR is turned on after a power failure
occurs during recording.
(Alarm Recording) indicator
Flashes during alarm recording and stays on when the alarm
recording is finished.
(Time Date Search/Day) indicator
Illuminates during the time date search.
Also, flashes while the VCR is turned off and the day of the
VCR’s clock has been set on the fluorescent display.
(Index Search) indicator
Flashes when recording an index signal and illuminates
during the index number setup and the index search. (Index
number is shown on the Recording and Playback Mode
display.)
(Skip Search) indicator
Illuminates during the skip search.
(Daylight Saving Time) indicator
Illuminates when “DAYLIGHT SAVINGS” is set to “ON”.
, (Tape Speed) indicator
Indicates the tape speed.
SP is standard play; LP is long play.
(Repeat) indicator
Illuminates when “TAPE END” in “FIRST TIME SET UP”
menu is set to “REPEAT” or “ALARM•PROT”.
(Cassette Status) indicator
Illuminates when a tape is inserted. The light advances,
stops or flashes corresponding to the movement of the tape.
(Timer Recording) indicator
Illuminates when the VCR is in stand-by for timer recording
or during timer recording.
(Tape Remaining) indicator
Indicates the absolute position on the tape. S indicates the
beginning of the tape and E indicates the end of the tape.
Counter/Clock display
While the VCR is turned on, indicates the relative position on
the tape. (The Counter stops counting where no recording is
made on the tape.) When it is off, the clock (24-hour format)
is shown.
Recording and Playback Mode/Index Number display
Displays the number corresponding to a selected recording
or playback mode. The mode shown here varies by the
“TAPE LENGTH” setting (E-180 or E-240) in “FIRST TIME
SET UP” menu. Also, displays the index number during the
index number setup and the index search.
(Emergency Recording) indicator
Illuminates when “EMERGENCY REC” in “RECORDING
SET UP” menu is set to “ON”.
Lock/Lock All indicator
: illuminates when all buttons (except REC button
and EJECT button) are locked.
: illuminates when all buttons are locked.
(Playback) indicator
Illuminates during playback.
(Recording) indicator
Illuminates during recording.