1 - 1 1 - 1
MELSEC-GOT
1 OVERVIEW
CHAPTER1 OVERVIEW
This manual that can be used on a GOT with an operating system installed. These
functions include the utility function, ladder monitor function, system monitor function,
special module monitor function, network monitor function, list editor function, motion
monitor function and servo amplifier monitor function.
POINT
Note that some functions cannot be performed depending on the used GOT and
the target CPU/connection form.
Refer to Chapter 2 for more information on the functions available for each GOT
and the restrictions on the functions per target CPU and connection form.
1.1 Features
The monitor functions described in this manual are intended to improve the efficiency
of trouble-shooting and maintenance operations for the PLC system.
The features of each monitor function are explained in the following sections.
1.1.1 Features of the utility function
The utility function enables you to use GOT setup and self-tests. To use the utility
function, you need to install an operating system for the utility function on the GOT
built-in internal memory by using GT Designer. The features of the utility function are
shown below.
POINT
Some of the utility functions cannot be used with GT SoftGOT. Refer to the GT
SoftGOT Version 5 Operating Manual for the utility functions available for GT
SoftGOT.
(1) The brightness of a monitor screen can be adjusted (see Section 4.3 for details).
1
Summary of Contents for GOT-A900 Series
Page 2: ......
Page 16: ...A 14 A 14 MEMO...
