Mitsubishi ECLIPSE CROSS 2017, Owner'S Manual

Page: 441 / 538

If the fuses and bulbs are all OK, we recom-
mend you to have your vehicle checked and
repaired.
Meter, gauge and indicator/
warning lamps operation
Start the engine and check the operation of
all instruments, gauges and indication and
warning lamps.
If there is anything wrong, we recommend
you to have your vehicle inspected.
Hinges and latches lubrication
Check all latches and hinges, and, if necessa-
ry, have them lubricated.
Fusible links
E01002901763
The fusible links will melt to prevent a fire if
a large current attempts to flow through cer-
tain electrical systems.
In case of a melted fusible link, we recom-
mend you to have your vehicle inspected.
For the fusible links, please refer to “Fuse
load capacity” on page 10-18 and “Engine
compartment fuse location table” on page
10-19.
WARNING
l
Fusible links must not be replaced by any
other device. Failing to fit the correct fusi-
ble link may result in fire in the vehicle,
property destruction and serious or fatal
injuries at any time.
Fuses
E01003003488
Fuse block location
To prevent damage to the electrical system
due to short-circuiting or overloading, each
individual circuit is provided with a fuse.
There are fuse blocks in the passenger com-
partment and in the engine compartment.
Passenger compartment
LHD vehicles
The fuse block in the passenger compartment
is located behind the fuse lid in front of the
driver’s seat at the position shown in the il-
lustration.
Pull the fuse lid to remove it.
RHD vehicles
The fuse block in the passenger compartment
is located behind the glove box at the posi-
tion shown in the illustration.
A- Fuse block
1. Open the glove box.
Fusible links
10-17
OGKE18E1
Maintenance
10