DX-VS1UE User’s Manual
65
Q. Regarding the setup program, if one of DX-VS1UE is chosen from the list box and the
Reboot button or Start Configuration button is clicked, the setup program returns a message
like “No response.”
A. If the IP address of the DX-VS1UE you selected is not included in the subnet to which
your PC belongs, the setup program returns a message like “No response”. Please set up the
IP address of DX-VS1UE again by pressing “Change IP Addr” button so that the IP address
of DX-VS1UE is included in the subnet to which your PC belongs.
Q. When changing the TCP port number of a Web server into 60000
th
from 80
th
, it became
impossible to access the homepage of DX-VS1UE. What is necessary to do?
A. Usually, an 80
th
port is the port number for transmitting and receiving data. Since this
number has been changed, it is impossible for DX-VS1UE and your browser to transmit and
receive data to each other. Please input an IP address into your browser as below and connect
with it.
http://***.***.***.***:60000/
“***.***.***.***” is the IP address of DX-VS1UE. If the homepage of DX-VS1UE is dis-
played now, please return the TCP port number of a Web server to 80
th
of origin immediately.
Q. I forgot the password of server configuration level. What is necessary to do?
A. Please consult the store where you purchased DX-VS1UE.
Q. Any operation of a digital recorder or an external camera cannot be performed.
A. Is the serial configuration set up appropriately? It is necessary to connect a digital recorder
to RX1, TX1, and GND of the serial port#1 by the RS232C cable. Moreover, when con-
necting an external camera via RS232C, it is necessary to connect with RX2, TX2, and GND
of the serial port#2. Furthermore, please check whether communication setting of baud rate,
stop bits, data bits, parity check, etc of an external camera or a digital recorder corresponds
with that of DX-VS1UE In the case of an external camera, please check whether the
Pan/tilt/zoom configuration is also set up correctly.
Q.The “LOADING” message keeps appearing on the homepage of DX-VS1UE. Why does
this occur?
A. This message may keep appearing when DX-VS1UE starts without input video signal.
Please check the input video signal.
ENGLISH
