38
ADJUSTMENTS & SETTINGS (SERVICE MENU)
SYSTEM SETUP System setting display
INCREMENT
OFF
Page increment is not available.
PART
Every time pressing MEMORY button, memory part goes to the next part
and image will be memorized on it. The memory page does not go to the
next. When MULTI:OFF, this mode works as same as PAGE mode.
PAGE
Every time pressing MEMORY button, memory page goes to the next
page and image will be memorized on it.
BUZZER
Selects sounds the buzzer when pressing the buttons on the VCP
and remote control unit.
OFF
Do not sound the buzzer
T1
Sound the buzzer (Tone 1)
T2
Sound the buzzer (Tone 2)
REMAINING BUZZER
Informs the number of remaining ink sheet by a buzzer
tone.
OFF
Does not sound the buzzer.
0 ~ 10
The buzzer sounds three times when 0 ~ 10 ink sheet are left (available to
set 1 sheet each).
When the number of remaining ink sheet reaches to the set value, the
buzzer starts sounding at printing each time. A red mark is printed at the
bottom of the printed image.
•
If a paper jam occurs, the remaining paper may not be informed correctly.
•
Make sure to replace the print paper and ink sheet at the same time.
REMAINING SCREEN
Selects displaying the remains of paper on the monitor or not.
OFF
Does not display the remains of ink sheet on the monitor.
ON
Displays the remains of ink sheet on the monitor.
•
If a paper jam occurs, the remains of the ink sheet may be different from the indication
on the monitor.
ERROR SCREEN
Selects displaying the error on the monitor.
OFF
When DISPLAY off is selected, the error is not displayed on the monitor.
ON
Even if DISPLAY off is selected, the error is displayed on the monitor.
AUTO FEED&CUT
Selects automatically feeding and cutting the print paper or not.
OFF
Does not feed and cut the print paper.
ON
When setting the print paper, this unit automatically feeds and cuts it twice
after closing the front door.
PAPER HOLD
Sets to hold the printed paper or not.
OFF
PAPER HOLD is not available.
ON
Printed paper is held at the print outlet after cut. Pull the paper out when
necessary.
•
It is recommended not to leave the printed paper holding at the print outlet. Some
malfunction may occur.
•
Do not turn off the power while holding paper or some malfunction may occur.
•
You can not use remote control unit with holding paper.
INIT PROG (Initialize program)
ALL
Initialize the program in MAIN MENU and SERVICE MENU.
MAIN
Initialize the program in MAIN MENU.
SERVICE Initialize the program in SERVICE MENU.
INITIALIZE
OFF
Does not initialize.
GO[SET] Starts initializing. When SET button is pressed, initializing starts.
SYSTEM SETUP
INCREMENT OFF/PART/PAGE
BUZZER
OFF/T1/T2
REMAINING BUZZER
OFF/0
REMAINING
SCREEN
OFF/ON
ERROR SCREEN
OFF/ON
AUTO
FEED&CUT
OFF/ON
PAPER
HOLD
OFF/ON
INIT PROG ALL/MAIN/SERVICE
INITIALIZE
OFF/GO[SET]