14
BEFORE OPERATION
2
2
2
2
2
INSTALLING THE INK CASSETTE
1
1
1
1
1
Eliminate any slack of the ink sheet.
Hold the coloured roller and turn the white roller.
2
2
2
2
2
Insert the ink cassette with the ink sheet into its compartment.
Put the ink cassette of the ink sheet with flat top side to each
1
. Then, set the other
side (with handle) as shown right. When exchanging the ink cassette and so on, remove
it by holding the handle. (See page 47.)
1
1
2
2
2
2
2
2
2
INSERT THE PRINTING UNIT
1
1
1
1
1
Push the printing unit until it is locked into place.
2
2
2
2
2
After plugging the power cord, press POWER button on the front
panel.
3
3
3
3
3
After the set conditions are displayed on the monitor, press
MEMORY button about 1 second with holding MONITOR button on
the front panel.
The print paper is automatically cut after feeding about 10 cm (4 inches).
4
4
4
4
4
Repeat the above step
3
3
3
3
3
once or twice.
Fingerprints and dust can be removed by feeding the print paper. The printing unit is
initialized.
NOTE
•
Make sure to press MONITOR button first for operating
3
and
4.
Pressing MEMORY button first operates to memorize the images. When
exchanging the printing paper or ink cassette during using the unit, the
recorded images may be erased by pressing MEMORY button first.
•
Do not feed the print paper more than 2 times. Doing so will not allow the
number of prints indicated on page 12 to be printed.
The installation of print paper and ink cassette is completed.
NOTE
An IC is built in the ink sheet. This is the IC chip, not a battery.
This IC can be thrown away as normal waste.