OC292-32
TIMER
TIMER
Remote
controller
display
A
CLOCK
No display
( )
"current
time"
( )
"timer start
time"
( )
"timer end
time"
TIMER
TIMER
1) Set the current time
1
Press CLOCK-ON-OFF button to display the “current time”
A
.
2
Each time you press button, the time increases in
increments of one minute. Each time you press button,
the time decreases in increments of one minute.
• Press and hold the button to rapidly change the time.
• The time changes in increments of one minute
➔
ten minutes
➔
in units of hour; in this order.
• Approximately ten seconds after pressing the button, the
display on the remote controller will turn off.
The example shows a timer set for operation start at 8:00 and
end at 17:00.
2) set the mode to continuous as follows
1
Press TIMER button to display
D
.
3) Set the time to start the unit as follows
2
Press CLOCK-ON-OFF button to display
B
ON.
3
Press
button to set the time that you want the
unit to start. The start time is displayed at
A
.
4) Set the time to stop the unit as follows
2
Press CLOCK-ON-OFF button to display
C
OFF.
3
Press
button to set the time that you want the
unit to stop. The stop time is displayed at
A
.
5) Set the mode to timer as follows
1
Press TIMER button to display
D
.
➔
A
1
2
A
D
BC
2
1
3
8-6. TIMER operation
OC292--2.qxp 02.9.26 4:52 PM Page 32
