A - CANCEL: to deactivate the cruise control
B - ACC RES: to increase the set speed or resume
previously set cruise control operation.
C - COAST SET: to set the desired speed and to
reduce the set speed
D - ON/OFF: to turn on/off cruise control
To set a cruising speed
1. Press
D and the CRUISE indicator light in the
meter cluster will be turned on.
2. accelerate or decelerate to your desired speed
(above 25 mph). Press
C and remove your foot
from the accelerator pedal.
To accelerate or decelerate speed
Press
B to increase set cruising speed.
Press
C to decrease set cruising speed.
To cancel the cruising speed
Press
A or press brake pedal, or press D .
6
OWN THE ROAD
– :SHIFT DOWN
+ :SHIFT UP
Paddle shifters (if equipped)
seat heater switch
Position - Action
(hi) - for quick heating
(lo) - to keep the seat warm
Drive mode selector (if equipped)
the drive mode can be selected by pressing the
switch while the ignition switch is in the on
position.
2WD: this mode is for economical driving on
normal dry roads and freeways.
4WD AUTO: this mode is for all driving conditions
on various roads.
4WD LOCK: this mode is for driving in slippery
conditions such as on snow-covered roads or sand.
cruise control
A
B
C
D
simply upshift or downshift
with a tap of your fingers,
without moving your hands
from the steering wheel.
You can return to the automatic
shifting mode by pulling the +
(shift UP) side paddle shifter
towards you and holding for
over
2 seconds.
