Mitsubishi 2010 Fuso FE Owner'S Manual Download

Page: 21 / 370

2-2

Warning labels

•

The caution and warning labels show important

information. Be sure to read them before using

the vehicle.

•

If any label has peeled so it is difficult to read, is

scratched or otherwise damaged, or has peeled

off completely, please inform an authorized

dealer. The warning and caution labels apply

only to the vehicle itself, not to any equipment

mounted on the vehicle. For information on cau-

tion and warning labels that apply to equipment

mounted on the vehicle, please refer to the

Owner’s Manual supplied by the manufacturer

of the equipment.

•

The caution and warning labels are located in

the cab as shown below. Samples of these

labels are indicated in this and following pages.

FE_FG.book Page 2 Wednesday, January 14, 2009 7:08 PM

Summary of Contents for 2010 Fuso FE



















































































































































































































































































































































































Search results

Summary of Contents for 2010 Fuso FE

Reviews:

Related manuals for 2010 Fuso FE

Brands by name

Popular brands

Mitsubishi 2010 Fuso FE, Owner'S Manual

Search results

Summary of Contents for 2010 Fuso FE

Reviews:

Related manuals for 2010 Fuso FE

Brands by name

Popular brands