ring
1460054
SERVICE
POINTS OF DISASSEMBLY
When disassembling the front disc brakes, disassemble both
sides (left
and right) as a set.
7. REMOVAL OF BOOT RING
Remove boot ring with flat tip
screwdriver.
8. REMOVAL OF PISTON
PISTON
Protect caliper body with cloth. Blow compressed air
through brake hose to remove piston boot and piston.
Caution
Blow compressed air gently.
10. REMOVAL OF PISTON SEAL
Remove piston seal with finger tip.
Caution
Do not use flat tip
screwdriver or other tool to
prevent damage to inner cylinder.
(2) Clean piston surface and inner cylinder with
ethylene, alcohol or specified brake fluid.
Specified brake fluid: MOPAR Brake
Conforming to
or
INSPECTION
l
Check cylinder for wear, damage or rust.
l
Check piston surface for wear, damage or rust.
l
Check caliper body guide pin or lock pin for wear.
l
Check pad for damage or adhesion of grease, check
backing metal for damage.
PAD WEAR CHECK
Measure thickness at the thinnest and worn area of the pad.
Replace pad assembly when pad thickness is less than the limit
Limit value: 2.0 mm
in.)
Summary of Contents for Laser 1993
Page 1: ......
