2. Remove guide pin. Lift caliper assembly and retain wit
wires.
Caution
Do not wipe off the special grease that is on the guid
pin or allow it to contaminate the guide pin.
3.
Remove the following parts from caliper support.
Pad &wear indicator assembly
Pad assembly
Clip
Inner shim
Outer shim
1 -piston type
P-piston type
4. With the pad removed, use a spring balance to
the rotation sliding resistance of the hub in the forward di
NOTE
Tighten the nuts in order to secure the disc to the hub.
5.
Securely attach the pad clip to the caliper support.
6.
Clean piston and insert into cylinder with tool.
7. Be careful that the piston boot does not become
when lowering the caliper assembly and install the guidt
pin.
Summary of Contents for Laser 1993
Page 1: ......
