– 26 –
NOTE
•
Two hours later, the air-conditioner stops SELF CLEAN operation au-
tomatically. To stop the air-conditioner immediately, press the ON/OFF
button.
•
SELF CLEAN operation is not operated after FAN, OFF TIMER and
SLEEP operations have finished.
•
The indoor unit fan runs for about two hours in SELF CLEAN operation.
•
The RUN light illuminates during SELF CLEAN operation.
•
Pressing the SLEEP button during SELF CLEAN operation cancels the
SELF CLEAN operation and then the unit is set to SLEEP operation.
•
This is not a function for removing mold, germs or grime that have
already adhered to the unit.
SELF CLEAN operation
■
SELF CLEAN operation should be run after COOL and DRY operation to remove the moisture from inside of the indoor unit and control
the growth of mold and bacteria.
2
Select SELF CLEAN on by pressing “ or (TIMER)”
button.
Select the SELF CLEAN operation by pressing the
MENU switch.
1
Press the SET button.
3
PRESET operation
■
This operation can save the preferred setting for future operation.
Select the PRESET operation by pressing the MENU
switch.
Select preferred OPERATION MODE, TEMPERATURE,
FAN SPEED and AIR FLOW direction.
Press the SET button.
When air-conditioner is operating COOL, DRY and
FAN, press MODE button 3 seconds or more. PRESET
operation will start.
1
2
3
4
NOTE
•
When pressing MODE button for PRESET operation during the 3D AUTO
or HIGH POWER operation, it will be canceled.
•
When pressing MODE button for PRESET operation during the
ECONOMY operation, it will continue.
(SELF CLEAN off)
(SELF CLEAN on)
3 seconds
1 second
ON
OFF
RLF012A104B_EN.indd 26
RLF012A104B_EN.indd 26
9/12/2017 16:08:42
9/12/2017 16:08:42