manualshive.com logo in svg

Mitsubishi Heavy Industries SRK10YSA-W, User Manual, Page: 25 / 33

Share
Download
Mitsubishi Heavy Industries SRK10YSA-W User Manual Download Page 25

– 24 –

SILENT operation

1

Releasing procedure

Press the SILENT button to turn off the SILENT display.

•

  During SILENT operation, the maximum cooling capacities deteriorate.

•

  SILENT operation will not function during DRY and FAN operation.

•

  In case of following operations, the air-conditioner will resume SILENT 

operation whenever it turns ON again. 

1

 

When the air-conditioner is stopped by ON/OFF button during SILENT 

operation. 

2

 

When the air-conditioner is stopped in SLEEP or OFF TIMER 

operation during SILENT operation. 

3

 

When the operation is retrieved from SELF CLEAN operation. 

•

  Not operable while the air-conditioner is OFF.

•

  The noise level of the outdoor unit may not decrease depending on the 

condition.

NOTE

2

Press the ON/OFF button.

Press the SILENT button.

•

  When the operating mode is COOL

Every time the SILENT button is pressed, the display is switched in the 
order of:

(SILENT on)

(SILENT off)

No display

■

  When the SILENT operation is set, the unit operates more silently reducing noise from the outdoor unit.

 

With the air-conditioner turned off, start the operation from Step 1. With the air-conditioner running, start from Step 2.

RLF012A104B_EN.indd   24

RLF012A104B_EN.indd   24

9/12/2017   16:08:42

9/12/2017   16:08:42

Summary of Contents for SRK10YSA-W


































Reviews:

No comments