Mitsubishi Heavy Industries eco touch RC-EX1, User Manual

Page: 32 / 58

— 31 —
■
Operation of each timer
① Set ON timer by hour
When the set time elapses, the air conditioner starts.
Operating conditions at the start of operation can be set.
Operation takes place once at each setting.
② Set OFF timer by hour
When the set time elapses, the air conditioner stops.
Operation takes place once at each setting.
③ Set ON timer by clock
The air conditioner starts at the set time.
Operating conditions at the start of operation can be set.
Only one day (Once) operation or operation Everyday can be set.
④ Set OFF timer by clock
The air conditioner stops at the set time.
Only one day (Once) operation or operation Everyday can be set
■
Setting of each timer can be combined. Allowable combination settings are as shown below.
Allowable combination setting (
○
: Allowed,
╳
: Prohibited)
Sleep OFF: Hours ON: Hours OFF: Clock ON: Clock Weekly
Sleep
× × ○ ○ ○
OFF: Hours
× × × × ×
ON: Hours
× × × × ×
OFF: Clock
○ × × ○ ×
ON: Clock
○ × × ○ ×
Weekly
○ × × × ×
If a prohibited combination setting is made, a message “This combination cannot be accepted” is displayed for 3 seconds.
■
Priority order of the timer settings (
①→③
) is as follows.
① Set OFF timer by hour/clock, weekly OFF timer
②
Sleep timer
③
Set ON timer by hour/clock, weekly ON timer
■
On the TOP screen, the timer is displayed from the earliest one out of OFF time of the sleep timer, ON time and OFF time.
1
When the “Set ON timer by hour” is tapped on the timer setting
menu screen, the Set ON timer by hour setting screen is displayed.
2
Select desired hours for the period to start operation by timer with
the
▲ ▼
buttons.
Range of setting time: 1 to 12 hours (at 1-hr intervals)
3
When operating conditions at the start of operation are set, tap the
Next button. (
☞ 4
)
When operating conditions are not set, tap the
Set
button.
4
Set the following operating conditions.
①
Warming up ON/OFF (the Main R/C only)
②
Operation mode … To
5
③
Set temp … To
6
④
Fan speed … To
7
■
Warming up setting can be made with the main R/C only.
■
Set the operation mode before setting the set temperature.
■
Set ON timer by hour