EN-33
INSTALLATION menu
INSTALLATION
LENS LOCK
LENS SHIFT LOCK
ZOOM/FOCUS LOCK
LENS SHIFT RESET
OFF
OFF
opt.
OK
INSTALLATION
LAMP MODE
STANDARD
LOW
OFF
STANDBY MODE
IMAGE REVERSE
LENS LOCK
opt.
ENTER
AUTO POWER ON
AUTO POWER OFF
OFF
ON
BLUE
5min
IMAGE CAPTURE
SPLASH SCREEN
BACK COLOR
ON
SETUP
AUTO
DVI LONG CABLE
ITEM
SETTING
FUNCTION
LAMP MODE
STANDARD
Select this option when you want to view images in a well-lit room.
LOW
Select to moderate the intensity of the lamp. The operating sound is reduced
and the lamp lifetime becomes longer.
STANDBY MODE
STANDARD
Select this option when you control the projector via the LAN terminal during
power standby. Audio is output from the AUDIO OUT terminal. Video signal is
output from the MONITOR OUT terminal.
LAN
Select this option when you control the projector via the LAN terminal during
power standby.
LOW
Select this option when you don’t control the projector via the LAN terminal
during power standby. This option disables the LAN terminal and reduces the
power consumption during the power standby.
AUTO POWER ON
ON / OFF
When ON is chosen, the projector is automatically turn on when the power
cord is plugged in the wall outlet. Choose ON when using the projector
mounted on the ceiling.
• The projector is in the stand-by mode when the lamp is off. Use the
remote control to turn on the lamp.
AUTO POWER OFF
OFF / 5min-8hour
When no video signal is input and no operation is made, the projector
automatically turns off after the selected time period. A dialog is displayed 5
minutes before the projector turns off.
IMAGE CAPTURE
SETUP
Use to capture the screen for the splash screen. (See page 48.)
SPLASH SCREEN
ON / OFF
Choose ON to display the splash screen when the power is turned on.
• The splash screen can be changed. (See page 48.)
BACK COLOR
BLUE / BLACK /
IMAGE
Use to select the background from among BLUE, BLACK and IMAGE, which
will be displayed when there is no signal input from the source. When IMAGE
is selected, the splash screen will be displayed.
IMAGE REVERSE
OFF
Select when viewing images from the front with the projector installed on the
floor.
MIRROR
Select when viewing images projected from the behind of the screen with the
projector installed on the floor.
INVERT
Select when viewing images projected from the behind of the screen with the
projector installed on the ceiling.
MIRROR INVERT
Select when viewing images from the front with the projector installed on the
ceiling.
LENS LOCK
ENTER
The LENS LOCK menu is displayed for the following settings.
ZOOM/FOCUS LOCK ON / OFF
Use to enable or cancel the FOCUS LOCK and ZOOM LOCK.
LENS SHIFT LOCK
ON / OFF
Use to enable or cancel the LENS SHIFT LOCK.
LENS SHIFT RESET OK
Use to reset the position of the lens to the factory setting.
DVI LONG CABLE
AUTO
Select this option for normal use.
MANUAL
Use to adjust the amount of transmission signal correction when a long DVI
cable is used.
• Regardless of the setting of LAMP MODE, the LOW lamp mode is activated by default whenever the projector is turned on. When
LAMP MODE has been set to STANDARD, the lamp mode changes from LOW to STANDARD about 2 minutes after turn-on.
• When the ambient operating temperature is high, the brightness of the lamp isn’t changed by switching the lamp mode.
• When the lamp mode is switched, the projected image may flicker.
• An icon
is displayed to the right of the menu bar while the projector is warmed up. While the icon is being displayed, you
cannot change the lamp mode. And an icon
is displayed while the operating ambient temperature is high. While the icon
is being displayed, the lamp may not brighten even when you change the LAMP MODE to STANDARD.
• Frequent switching of the lamp mode may damage the lamp.
• You can’t set IMAGE CAPTURE and SPLASH SCREEN when PASSWORD FUNCTION in the FEATURE menu has been set to
SPLASH ID SCREEN to enable the password lock.
• When you set BACK COLOR to IMAGE and display the splash screen (startup screen) for a long time of period, the after-image
may remain on the screen. Consult your dealer in this case.
• Don’t adjust the lens frequently with BACK COLOR set to IMAGE.
• The power can be saved using the functions marked with on the icon.
Menu operation (continued)
