manualshive.com logo in svg

Mitsubishi Electric XL7100U, User Manual, Page: 3 / 68

Share
Download
Mitsubishi Electric XL7100U User Manual Download Page 3

EN-3

Contents

Important safeguards ........................................................................................................................4
Preparing your projector ....................................................................................................................6
Using the remote control ...................................................................................................................9
Setting up your projector .................................................................................................................11
Viewing computer images ...............................................................................................................18
Viewing video images ......................................................................................................................24
Menu operation ...............................................................................................................................30
Adjusting projected images .............................................................................................................39
Initial network settings .....................................................................................................................44
Advanced features ..........................................................................................................................48
Replacing the lamp .........................................................................................................................53
Maintenance ....................................................................................................................................55
Roll-up filter .....................................................................................................................................56
Replacing the lens ...........................................................................................................................57
Troubleshooting ...............................................................................................................................58
Indicators .........................................................................................................................................62
Specifications ..................................................................................................................................63

Trademark, Registered trademark

•  HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI 

Licensing LLC.

•  Microsoft, Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation 

in the United States and/or other countries.

•  Mac is a registered trademark of Apple Inc. 
•  The trademark of PJLink is trademark applied for registration or registered trademark in Japan, the United States, 

and other countries and areas.

•  Crestron RoomView Connected is a trademark of Crestron Electronics, Inc.
•  Other brand or product names are trademarks or registered trademarks of their respective holders.

Summary of Contents for XL7100U





































































Reviews:

No comments