EN-22
Menu operation (continued)
4. SINGAL menu
•
Horizontal strips may appear in the enlarged projected image, though these conditions are not a malfunction.
•
When you change the value of the horizontal or vertical position drastically, noise may appear.
•
The adjustable range of the vertical position varies depending on the type of the input signal. The image may be stationary even when the value
is changed. These conditions are not a malfunction.
•
SHUTTER does not work correctly during keystone adjustment.
•
When you increase the value of OVER SCAN, noise may appear on the screen.
Important:
•
You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is input.
5. INFORMATION menu
Menu option
Setting
Feature description
SIGNAL USER menu
HORIZ. POSITION
0-999
Select this setting to adjust the horizontal position of projected images.
VERT. POSITION
0-999
Select this setting to adjust the vertical position of projected images.
FINE SYNC.
0-31
Select this setting to eliminate flickering or blurs, if they appear, when
you are viewing projected images.
TRACKING
0-2800
Select this setting to eliminate vertical wide stripes, if they appear, when
you are viewing projected images.
COMPUTER INPUT
AUTO
Automatically sets the appropriate setting.
RGB
Select this setting when you connect the projector to high definition
video equipment having R, G, and B output terminals.
YC
B
C
R
/YP
B
P
R
Select this setting when you connect the projector to a DVD player or
other device having Y, C
B
, and C
R
(or Y, P
B
, and P
R
) component video
output terminals.
OVER SCAN
100%-90%
Use this setting to adjust the display area of projected images.
HOLD
OFF / ON
Use this setting to adjust projected images when flagging occurs in the
upper area of the screen.
USER
OK
CLAMP POSITION
1-255
Use this setting to correct solid white or solid black that appears in pro-
jected images.
CLAMP WIDTH
1-63
Use this setting to correct solid black that appears in projected images.
VERT.SYNC
AUTO / OFF
Use this setting to adjust projected images when the motion is not
smooth. Select AUTO for most cases.
LPF
ON / OFF
Select this setting to enable or disable LPF.
SHUTTER(U)
0-20
Use this setting to adjust projected images when noise appears in the
top part of the image.
SHUTTER(L)
0-20
Use this setting to adjust projected images when noise appears in the
bottom part of the image.
SHUTTER(LS)
0-20
Use this setting to adjust projected images when noise appears in the
left half of the image.
SHUTTER(RS)
0-20
Use this setting to adjust projected images when noise appears in the
right half of the image.
Menu option
Feature description
LAMP TIME (LOW)
This menu shows a lamp operating time (hour) calculated assuming that LAMP MODE is LOW.
•
When the LAMP MODE is STANDARD, this menu shows a longer lamp operating time than
the actual time. (See page 28 for the interval of lamp replacement.)
•
When the lamp operating time is 0 to 10 hours, "0H" is displayed. When the lamp operating
time exceeds 10 hours, the actual hours are displayed.
•
When the lamp operating time reaches 3000 hours, the bar turns yellow. When it reaches
3800 hours, the bar turns red.
(The lamp lifetime is 4000 hours.)
INPUT
Indicates the name of the terminal to which the currently projected video signal is being input.
RESOLUTION
Indicates the resolution of the currently projected video signal.
VERTICAL FREQUENCY
Indicates the vertical frequency of the currently projected video signal.
HORIZONTAL FRE-
QUENCY
Indicates the horizontal frequency of the currently projected video signal.
SYNC. TYPE
Indicates the type of the sync signal for the currently projected video signal.
R G B
R G B
SIGNAL
HORIZ. POSITION
0
VERT.POSITION
0
TRACKING
0
COMPUTER
INPUT
RGB
FINE SYNC.
0
USER
opt.
OK
OFF
HOLD
100%
OVER SCAN
CLAMP
POSITION
USER
1
CLAMP WIDTH
1
LPF
OFF
SHUTTER(U)
0
SHUTTER(L)
0
VERT. SYNC
AUTO
?
SHUTTER(LS)
0
SHUTTER(RS)
0
SIGNAL
opt.
INFORMATION
opt.
LAMP TIME (LOW)
INPUT
RESOLUTION
VERTICAL
FREQUENCY
HORIZONTAL
FREQUENCY
SYNC. TYPE
5wire
60.02 KHz
75.04 Hz
1024x768
COMPUTER2
0 H
R
G
H
V
B
