Mitsubishi Electric WD-52525 Owner'S Manual Download Page 102 | Manualshive

Page: 102 / 108

background image

102

103

LICENSOR’S SUPPLIERS DO NOT MAKE OR PASS ON TO END USER OR ANY OTHER THIRD PARTY,

ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY OR REPRESENTATION ON BEHALF OF SUCH

SUPPLIERS, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, TITLE,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

CableCARD™ is a trademark of Cable Television Laboratories, Inc.

HDMI™ the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.

Manufactured under license from Dolby Laboratories. Dolby® and the double-D symbol are registered trademarks
of Dolby Laboratories.

Lifestyle® 28 is a trademark of the Bose Corporation.

XBox™ is a trademark of the Microsoft Corporation.

Playstation® 2 is a trademark of the Sony Corporation.

This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a

license from Microsoft Licensing, Inc.

DTVLINK™ Certification Logo is a trademark of the Consumer Electronics Association.

DCR™ Certification Logo is a trademark of the Consumer Electronics Association.

Firewire® is a trademark of Apple Computer, Inc. registered in the U.S. and other countries.

Digital Light Processing™ and DLP™ are trademarks of Texas Instruments.

MonitorLink™, NetCommand®, ViewPoint®, QuickView™, SuperQuickView™, Diamond Shield™, PerfectColor™
and Definedge™ are trademarks of Mitsubishi Digital Electronics America, Inc.

Additional Information

Do not attempt to update the software of this TV with software or cards that are
not provided by or authorized by Mitsubishi Digital Electronics America, Inc. Non-
authorized software may damage the TV and will not be covered by the warranty.

IMPORTANT

Demo Mode

This TV has a demo mode for use in a retail store.

To turn On/Off, press the following buttons in sequence:

MENU, 0, QV, 0

«
...
100
101
102
103
104
...
»

Summary of Contents for WD-52525













































































































Reviews:

No comments

Related manuals for WD-52525

Brand: IEI Technology Pages: 132

i3TOUCH E1055 4K

Brand: i3-TECHNOLOGIES Pages: 20

VIO-100 PC300 Series

Brand: C&T Solution Pages: 109

Brand: i3-TECHNOLOGIES Pages: 10

Brand: Fagor Pages: 94

AFL2-17AB-H61 Series

Brand: IEI Technology Pages: 178

Brand: YOKOGAWA Pages: 6

Brand: JVC Pages: 22

Brand: JVC Pages: 22

LT-37X688 - 37" LCD TV

Brand: JVC Pages: 81

Brand: JVC Pages: 88

LT-37X688 - 37" LCD TV

Brand: JVC Pages: 34

Brand: JVC Pages: 73

Brand: JVC Pages: 109

Brand: JVC Pages: 141

Brand: JVC Pages: 40

Brand: JVC Pages: 185

Brand: Panasonic Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands