Page 19
MODELS: LT-55154 / LT-40164 / LT-46164 / LT-55164 / LT-46265 / LT-55265
The same PWB-MAIN is used for different screen sizes within a chassis family. When a PWB-MAIN is replaced,
the screen size must be set up. Failure to setup the correct screen size will result in poor picture performance.
1. Press the <MENU><2-4-5-7> buttons. The Service Menu will appear.
2. Press the <0> button. The Data Selection Menu will appear.
3. Use the <
TS
> buttons to select “SET SCREEN SIZE” and press <ENTER>.
4. Use the <
TS
> buttons to toggle to select the correct screen size and chassis of the model being ser-
viced.
5. Press
<ENTER>.
6. The Screen Size indication will flash Red momentarily to indicate the selection has been saved.
Screen Size Menu
<MENU><2-4-7-0><0> “SELECT SCREEN SIZE”
SCREEN SIZE MENU
Screen Size : 55inch - VLP43
To toggle Screen Size, press “UP” or “DOWN”
To save the current value press “ENTER”
To exit this menu, press “EXIT” or “MENU”
SOUND PROJECTOR TRANSDUCER TEST
BACKUP AND RESTORE ISF SETTINGS
RED ONLY AND GREEN ONLY
SET SCREEN SIZE
SET SCREEN SIZE
Summary of Contents for Unisen LT-40164
