7. Remote controller button functions
(3) RETURN button
(4) MENU button
(2) SELECT button
(5) Backlit LCD
(7) Function buttons
F1, F2, F3, and F4 from the left
(6) ON/OFF lamp
(1) ON/OFF button
Main
Main display:
Cursor
Main menu
User options
Commissioning
Maintenance
F1
F2
F3
F4
Cursor
(1) ON/OFF button
Press to turn ON/OFF the Lossnay unit.
(2) SELECT button
Press to save the setting.
(3) RETURN button
Press to return to the previous screen.
(4) MENU button
Press to bring up the Main menu.
(5) Backlit LCD
Operation settings will appear.
When the backlight is off, pressing any button turns the backlight on
and it will stay lit for a certain period of time depending on the screen.
(6) ON/OFF lamp
This lamp lights up in green while the unit is in operation. It blinks
while the remote controller is starting up or when there is an error.
(7) Function buttons
Use to select the Ventilation mode and fan speed on the Main display.
Use to select items on other screens.
Button operations on the Main menu
Note: When the backlight is off, pressing any button turns the backlight
on and does not perform its function. (except for the
button)
Note: If the function is not set in the function button, the function
button guide will not be displayed.
Pressing the
button will bring up the Main menu as
shown below.
(Refer to section 8.(2) “Main display” for details.)
User options
*1, *3
Commissioning
*1, *2, *3
Maintenance
*1, *3
*1 Refer to the Instructions Book for details.
*2 Explained in this manual.
*3 If no buttons are pressed for 10 minutes (2 hours on
some screens), the screen will automatically return to
the Main display. Any settings that have not been saved
will be lost.
The available items on the menu depend on the connected
Lossnay unit model. For items not described in the manuals
that are enclosed with the remote controller, refer to the
manuals that came with the Lossnay units.
Move the cursor to the desired function with the
and
but-
tons, and press the
button to go to the next page. Password
may be required.
The function of the
,
, and
buttons will appear on
the setting screens.
Button function guide will appear at the bottom of the screens.
Eng-9
