9
02380 274 833 | [email protected]
Installing the Pre-plumbed Mono Cylinder
Installing the pre-plumbed mono cylinder
When you order the pre-plumbed cylinder, it comes with an FTC, the tank sensor, flow and return sensors and
controller all installed for you.
Install the pre-plumb indoors, it’s not waterproof. It needs to be sited within 15m of the outdoor unit.
Model Type
Nominal
Capacity (litres)
Weight of full
unit (kg)
Weight of unit
(kg)
Standing Heat Loss
per day
(kWh/24h)
per year
(kWh/365d)
Standard
150
206
56
1.19
434.4
Standard
170
232
62
1.32
481.8
Standard
210
279
69
1.57
573.1
Standard
250
327
77
1.67
609.6
Standard
300
387
87
1.89
689.9
Solar
210
284
74
1.56
569.4
Solar
250
332
82
1.63
595.0
Solar
300
392
92
1.84
671.6
Slimline
150
204
54
1.45
529.3
Slimline
170
230
60
1.63
595.0
The Pre-plumbed Cylinder
Flow from HP
Boiler Flow
Return to HP
Boiler Return
Heating Return
Heating Flow
G3 kit already installed.
It comes with a white
expansion vessel in the kit
Hot water pump and plate
hex. The cylinder has no coil
inside, the potable water is
pumped through the plate by
this pump. There is also a
de-scaler in line.
Primary pump
pumps water to the
outdoor unit and back
Installation Manual.indd 9
27/10/2019 15:13:58
