manualshive.com logo in svg

Mitsubishi Electric PUH-P1.6VGA, Technical & Service Manual, Page: 18 / 34

Share
Download
Mitsubishi Electric PUH-P1.6VGA Technical & Service Manual Download Page 18

18

9

DISASSEMBLY PROCEDURE

OPERATING PROCEDURE

PHOTOS

PUH-P5/6YGA

1. Removing the Service panel and Top panel

(1) Remove the 3 service panel fixing screws (5 

✕

15) and

slide the hook to remove the service panel.

(2) Remove the screws (3 for front, 2 for rear/5 

✕

15) of the

top panel and remove it.

<When the rear screws of the top panel are not possible

to remove>
Remove the 3 front screws (5 

✕

15) of the top panel and

lift the front side of the top panel.

Photo 1

Top panel screws

Top panel

Service panel
screws

Service panel

Fan guard screws

Fan guard

2. Removing the Fan and Fan motor

(1) Remove the 6 fan guard screws (5 

✕

15) to remove it.

(See Photo 1)

(2) Remove the propeller nut (M8) and propeller fan.
(3) Remove the 3 fan motor screws (5 

✕

25) to remove the

fan motor.

Fan motor screws

Fan motor

Photo 3

3. Removing the Electric parts box

(1) Remove the service panel. (See Photo 1)
(2) Remove the top panel. (See Photo 1)
(3) Remove the Solenoid valve, Crankcase heater, Pressure

switch<for high pressure>, Pressure switch <for low
pressure>, Piping thermistor, Discharge thermistor,
condenser/evaporator temperature thermistor and 4-way
from the housing on the controller board,then disconnect
the fan motor lead wire from the housing mentioned before
and the condenser lead wire for the fan from the electric
box.

<Diagram symbol in the housing>

Solenoid valve (SV) · Crankcase heater (CH)
Pressure switch <for high pressure> (63H)
Pressure switch <for low pressure> (63L)
Piping thermistor (TH3) · Discharge thermistor (TH4)

Condenser/evaporator temperature thermistor (TH6)
4-way valve (21S4) · Fan motor (MF3, MF4)

(4) Remove the terminal cover and disconnect the compressor

lead wire and inner thermal device terminal.

(5) Remove an electric parts box screw (4 

✕

10) and lift the

box to remove it. The electric box cover is hooked at 2
points on the left and 1 point on the right.

Fan guard

Electric parts box

Outdoor unit
controller board

Electric parts box
fixing screw

Terminal cover

Cover panel

Cover panel fixing screw

Compressor

Photo 2

Summary of Contents for PUH-P1.6VGA



































Reviews:

No comments