11
7. After completing steps 3 to 6 above, press the Filter button to lock
in the value.
Note:
Your new settings will be cancelled if you press the Mode (Return) button
before pressing the Filter
button
.
8. Press the Mode (Return) button to return to the standard control
screen.
9. Press the Timer On/Off button to start the timer countdown. When
the timer is running, the timer value is visible on the display.
Be sure
that the timer value is visible and appropriate.
<Viewing the Current Simple Timer Settings>
TIMER
ON
OFF
Hr
AFTER
SIMPLE
Timer Setting
°C
°C
SIMPLE
°C
°C
ON
Hr
AFTER
SIMPLE
˚C
˚C
OFF
Hr
AFTER
SIMPLE
ON
Hr
AFTER
SIMPLE
˚C
˚C
SIMPLE
ON
Hr
AFTER
SIMPLE
˚C
˚C
OFF
Hr
AFTER
SIMPLE
SIMPLE
At 3 hours after timer start
Display changes to show the timer’s OFF set-
ting (hours remaining to OFF).
The time displayed is OFF setting (7 hours) –
ON setting (3 hours) = 4 hours.
At Timer Start
Display shows the timer’s ON setting (hours
remaining to ON).
At 7 hours after timer start
The air conditioner goes off, and will remain
off until it is restarted.
At 2 hours after timer start
Display changes to show the timer’s ON set-
ting (hours remaining to ON).
The time displayed is ON setting (5 hours) –
OFF setting (2 hours) = 3 hours.
At Timer Start
Display shows the timer’s OFF setting (hours
remaining to OFF).
At 5 hours after timer start
The air conditioner comes on and will continue
to run until it is turned off.
AFTER
OFF
AUTO OFF
PAR-21MAA
ON/OFF
FILTER
CHECK
OPERATION
CLEAR
TEST
TEMP.
MENU
BACK
DAY
MONITOR/SET
CLOCK
ON/OFF
AFTER
OFF
AUTO OFF
Timer Setting
6. Timer
6.1.3. Auto Off
Timer
This timer begins countdown when the air conditioner starts and shuts
the air conditioner off when the set time has elapsed.
Available settings run from 30 minutes to 4 hours in 30-minute inter-
vals.
Note:
*1. Weekly Timer/Simple Timer/Auto Off Timer cannot be used at the same
time.
*2. The Auto Off timer will not operate when any of the following conditions
is in effect.
The timer is off; the system is in malfunction state; a test run is in
progress; the remote controller is undergoing self-check or remote con-
troller check; the user is in the process of selecting a function; the user is
in the process of setting the timer; the system is under central control.
(Under these conditions, On/Off operation is prohibited.)
1. Be sure that the simple timer indicator is visible on the screen (at ).
2. Press the Timer Menu button , so that the “Monitor” appears on the
screen (at ).
• If the ON or OFF simple timer is running, the current timer value will
appear at .
• If ON and OFF values have both been set, the two values appear
alternately.
3. Press the Mode (Return) button to close the monitor display and
return to the standard control screen.
<To Turn Off the Simple Timer...>
Press the Timer On/Off button so that the timer setting no longer ap-
pears on the screen (at ).
Examples
If ON and OFF times have both been set at the simple timer, operation
and display are as indicated below.
Example 1:
Start the timer : ON time is set earlier than OFF time.
ON Setting : 3 hours
OFF Setting : 7 hours
<To Turn On the Simple Timer...>
Press the Timer On/Off button so that the timer setting becomes vis-
ible at .
Example 2:
Start the timer : OFF time is set earlier than ON time.
ON Setting
: 5 hours
OFF Setting : 2 hours
1.Be sure that you are at a standard control screen, and that the Auto Off
timer indicator is visible in the display (at ).
When something other than the Auto Off Timer is displayed, set it to
AUTO OFF TIMER using the function selection of remote controller (see
8.[4]–3 (3)) timer function setting.
2. Hold down the Timer Menu button for
3 seconds
so that the “Set
Up” appears on the screen (at ).
(Note that each press of the button toggles the display between “Set
Up” and “Monitor”.)
3. Press the appropriate Set Time button A as necessary to set the OFF
time (at ).
4. Press the Filter button to lock in the setting.
Note:
Your entry will be cancelled if you press the Mode (Return) button
before
pressing the Filter
button
.
5. Press the Mode (Return) button to complete the setting procedure
and return to the standard control screen.
6. If the air conditioner is already running, the timer starts countdown
immediately.
Be sure to check that the timer setting appears cor-
rectly on the display.
<How to Set the Auto Off Timer>
01_BH79D046H01_EN_1128.indd 11
01_BH79D046H01_EN_1128.indd 11
11/28/2006 12:14:19 PM
11/28/2006 12:14:19 PM
