15
GB
5. Installing the grille
F
E
:LULQJWKHL6HHVHQVRUFRUQHUSDQHODQGVLJQDOUHFHLYHU
,QVWDOOWKHL6HHVHQVRUDQGVLJQDOUHFHLYHUDWWKHFRUQHUVRIWKHSDQHODWWKHORFD
-
WLRQVVWDPSHGZLWK³ż´RU³Ƒ´7KHSRVLWLRQVPD\EHUHYHUVHG
5RXWHWKHL6HHVHQVRUDQGVLJQDOUHFHLYHUZLUHVWKURXJKWKHVTXDUHKROHVDWWKH
corners of the panel and install them.
&RQQHFWWKHMXQFWLRQZLUHFRQQHFWRUDQGWKHZLUHFRQQHFWRUVRIWKHL6HHVHQVRU
and signal receiver in the connector box.
&ORVHWKHFRQQHFWRUER[FRYHU
6HFXUHWKHL6HHVHQVRUDQGVLJQDOUHFHLYHUZLUHVWRWKHSDQHOZLWKWKHIDVWHQHU
as shown in the diagram so that there is no slack in the wires, and then cut off the
excess end of the fastener. (Fig. 5-13)
3ODFHWKHL6HHVHQVRUDQGVLJQDOUHFHLYHUZLUHVWRWKHLQVLGHRIWKHÀDQJHRQWKH
panel.
,IWKHSRVLWLRQRIWKHL6HHVHQVRUZDVFKDQJHGIURPWKH³ż´SRVLWLRQ(WRWKH³Ƒ´
SRVLWLRQ)FKDQJHWKHVZLWFKVHWWLQJV5HIHUWRSDJH
Caution:
5RXWHWKHL6HHVHQVRUDQGVLJQDOUHFHLYHUZLUHVDVVKRZQLQ)LJ
3ODFHWKHH[FHVVSRUWLRQVRIWKHL6HHVHQVRUDQGVLJQDOUHFHLYHUMXQFWLRQ
ZLUHVLQWKHHOHFWULFFRPSRQHQWER[LQWKHZLUHFOLSDVVKRZQLQWKHGLDJUDP
and secure the wires together with the fastener. (Fig. 5-15)
Make sure that the band securing the i-See sensor and signal receiver junc-
WLRQZLUHVLVSRVLWLRQHGLQVLGHWKHFRQQHFWRUER[)LJ
,IWKHYDQHPRWRUFRQQHFWRUVDQGVLJQDOUHFHLYHUFRQQHFWRUDUHFRQQHFWHG
LQFRUUHFWO\WKHYDQHVZLOOQRWPRYHRUFRPPXQLFDWLRQZLWKWKHUHPRWHFRQ
-
troller will not be possible.
A
i-See sensor
B
Signal receiver
C
Fastener
D
Wire clip
E
³ż´VWDPSGHIDXOWL6HHVHQVRUSRVLWLRQ
F
³Ƒ´VWDPSGHIDXOWVLJQDOUHFHLYHUSRVLWLRQ
B
A
i-See sensor
or signal
receiver
Vane
)LJ
Fig. 5-15
)LJ
C
Fig. 5-12
C
)LJ
D
