![background image](http://html.mh-extra.com/html/mitsubishi-electric/pc-380p1/pc-380p1_user-manual_21209005.webp)
EN-8
EN-9
ENGLISH
When operating the interactive pen, see also the manuals supplied with the projector and the
computer.
Preparation:
• Connect the projector to the computer using the USB cable supplied with the projector.
• Confi gure the settings for using the interactive pen in the menu of the projector.
• Project the image supplied from the computer.
Pen tip
L button
R button
P (pairing) button
Power switch
BATTERY indicator
LINK indicator
1. Turn the power switch to ON.
• The LINK indicator blinks green and the interactive pen starts searching for the operable
projector.
• When the projector is found, the LINK indicator illuminates in red or blinks rapidly,
showing that the computer is operable via the projector.
• When the projector isn’t found or the interactive pen isn’t operated for a certain period
of time, the LINK and BATTERY indicators illuminate in red and then go off, and the
interactive pen turns in low power mode.
2. Operate the computer using the buttons described below while viewing the projected
images.
Button
Function
L button
This button works as the left button of a mouse. (When pressed, it works as
the click operation, and when the interactive pen is moved while the button is
pressed, it works as the drag operation.)
Pressing this button during the low power mode resumes the operation mode.
Pen tip
When this button is pushed to the projected screen, it works as pressing the L
button.
R button
This button works as the right button of a mouse. (When pressed, it works as
the click operation, and when the interactive pen is moved while the button is
pressed, it works as the drag operation.)
Pressing this button during the low power mode resumes the operation mode.
P button
When this button is held down, the mode of the interactive pen switches to the
pairing preparation mode.
When this button and the R button are held down at the same time, the pairing
setting is cancelled. (For the details of the pairing, see the User Manual supplied
with the projector.)
3. After the operation is completed, turn the power switch to OFF.
Operation
Indicators
The condition of the interactive pen is notifi ed by the illumination status of the BATTERY and
LINK indicators.
• When the pairing isn’t set
BATTERY
LINK
Condition
Off
Blinking green
(Repeating “blinks twice in 0.5
second and goes off for 0.5 second”)
Searching the projector that can be operated
with the interactive pen
Off
Blinking red
or
Blinking red
(rapidly)
Interactive pen is in operation.
Off
Blinking green (once every 3 seconds)
Communicating with the projector
*1
• When the pairing is set
BATTERY
LINK
Condition
Off
Blinking green (four times a second)
During the pairing preparation mode (searching
for the projector to be paired with)
Off
Blinking green (once a second) three
times
The pairing with the projector is established or
cancelled.
Off
Blinking red
or
Blinking red
(rapidly)
Interactive pen is in operation.
Off
Blinking green (once every 3 seconds)
Communicating with the projector
*1
Off
Blinking red fi ve times
The supported projector isn’t detected during
the pairing preparation mode.
Off
Blinking green (twice a second)
Searching the paired projector
• During the low power mode
BATTERY
LINK
Condition
Steady red
Steady red
Shifting to the low power mode
Off
Off
During the low power mode
• When the error occurs
BATTERY
LINK
Condition
Off
Blinking green/red
Communication error occurs.
Turn off the power of the interactive pen once,
and after a few seconds, turn it on again.
*1: Such as the case that the Interactive Mode setting of the projector is turned Off while the interactive pen is
operated.