Mitsubishi Electric PAR-33MAAG, Instruction Book

Page: 19 / 640

19
Restrictions for the sub remote controller
Main
Main display:
Cursor Page
Main menu
Vane·Louver·Vent. (Lossnay)
High power
Timer
Weekly timer
OU silent mode
The following settings cannot be made
from the sub remote controller. Make these
settings from the main remote controller.
"Main" is displayed in the title of the Main
menu on the main remote controller.
• Timer
(On/Off timer, Auto-Off timer)
• Weekly timer
• OU silent mode
• Energy saving
(Auto return, Schedule)
• Night setback
• Maintenance
(Manual vane angle)
Setting and display
items
Setting details Reference
page
Night setback Use to make Night setback settings.
•Select "Yes" to enable the setting, and "No" to disable the setting. The
temperature range and the start/stop times can be set.
* Clock setting is required.
* 1ºC increments
43
Filter information Use to check the filter status.
•The filter sign can be reset.
56
Error information Use to check error information when an error occurs.
•Error code, error source, refrigerant address, unit model, manufacturing
number, contact information (dealer's phone number) can be displayed.
* The unit model, manufacturing number, and contact information need
to be registered in advance to be displayed.
58
Maintenance Manual vane
angle
Use to set the vane angle for each vane to a fixed position. 45
Initial
setting
Clock Use to set the current time. 25
Main
display
Use to switch between "Full" and "Basic" modes for the Main
display.
•The default setting is "Full."
48
Contrast Use to adjust screen contrast. 49
Language
selection
Use to select the desired language.
50
Daylight
saving
time
Sets the daylight saving time. 52
Service Function
setting
(CITY MULTI)
Use to make settings for indoor unit's functions.
54