Mitsubishi Electric PAC-YT32PTA, Instruction Book

Page: 10 / 168

10
8. Setting Centigrade (
°
C)/Fahrenheit (
°
F) at Set Back Operation
1 Press the [SET/MONITOR] button and select the “SET” mode.
2
Press the [DAY] and [DAILY TIMER] buttons simultaneously and select the “C/F” mode.
- Release the “C/F” mode by operating a button other than the [SET BACK] button.
- If no operation is performed within 3 minutes in the “C/F” mode, the set mode is released.
3 During the “C/F” mode, [SET BACK] blinks.
At this time, the SET BACK display changes SET BACK C
↔
SET BACK F each time the [SET BACK]
button is pressed. Set to match the connected remote controller.
- If a Centigrade type remote controller is connected, set to “SET BACK C”.
- If a Fahrenheit type remote controller is used, set to “SET BACK F”.
4
At the end of setting, press a button other than the [SET BACK] button and switch from the “C/F” setting
mode to the “SET” mode.
5
Press the SET/MONITOR button and return to the “MONITOR” mode.
1 2 5 34
■
S
▲
■
M
▲
■
T
▲
■
W
▲
■
T
▲
■
F
▲
■
S
▲
SET BACK
MODE A MODE B
0 3 6 9 12
12 15 18 21 24
SET
M
ONITOR
SET/MONITOR
ON/OFF/SET BACK
WEEKLY SETTING
PAC-YT32PTA
CLOCK TODAY
DAILY SETTING
▲
▲
▲
MODE A/B/OFF DAY SET BACK DAILY TIMER MODE A/B